Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR2 DIMM sticks with gold contacts

Simmtec, Inc

Simmtec, Inc 4GB (2x2GB) DDR2 DIMM 240-pin 667MHz PC2-5400/PC2-5300 for DFI LANPARTY LP UT 790FX-M2R

SKU CH-CP3D-2SYNM

4GB DDR2 kit with two 240-pin DIMMs at 667MHz PC2-5400/PC2-5300 for DFI LANPARTY LP UT 790FX-M2R

  • Capacity4GB (2 x 2GB)
  • 4 GB total capacity from two 2 GB modules
  • 240-pin DDR2 DIMM fits the motherboard slots
  • 667 MHz PC2-5400/PC2-5300 speed rating
  • Tested 100 % compatible with DFI LANPARTY LP UT 790FX-M2R

DDR2 DIMM kit for DFI LANPARTY

This kit supplies 4GB of DDR2 memory in a matched pair of 2GB modules. The 240-pin DIMMs run at 667MHz and are rated for PC2-5400 and PC2-5300 operation. They are validated for 100% compatibility with the DFI LANPARTY LP UT 790FX-M2R motherboard.

Upgrade path for older DDR2 systems

The modules replace slower or mismatched DDR2 sticks in compatible boards, restoring dual-channel bandwidth at the rated 667MHz speed. The jump is worth it when the existing memory is limiting multitasking or causing instability on this specific platform.

Helstu kostir

  • 4 GB total capacity from two 2 GB modules
  • 240-pin DDR2 DIMM fits the motherboard slots
  • 667 MHz PC2-5400/PC2-5300 speed rating
  • Tested 100 % compatible with DFI LANPARTY LP UT 790FX-M2R

Tæknilýsing

Capacity4GB (2 x 2GB)

Spurningar um þessa vöru

Will the 240-pin DDR2 DIMMs fit the DFI LANPARTY LP UT 790FX-M2R board?

Yes — the kit is specified as 100% compatible with the DFI LANPARTY LP UT 790FX-M2R and uses the standard 240-pin DDR2 DIMM form factor that board requires.

What is the correct way to seat the two 2GB modules, and what step do people often miss?

Align the notch on each 240-pin DDR2 module with the slot key, press straight down until the retention clips click, and ensure both sticks are fully latched — the most common mistake is stopping when the module feels tight but before the clips engage.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.