Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

Simmtec, Inc

Simmtec, Inc 6GB (3 x 2GB) DDR2 DIMM 240 PIN 667Mhz PC2 5400 / PC2 5300 FOR DFI LANPARTY LP JR 790GX-M2RS

SKU CH-HQGP-90QRG

6GB DDR2 kit with three 2GB DIMMs running at 667MHz PC2-5400/5300 for DFI LANPARTY LP JR 790GX-M2RS motherboards

  • Capacity6GB (3 x 2GB)
  • 6 GB total capacity from three 2 GB modules
  • DDR2 667 MHz speed rated at PC2 5400 and PC2 5300
  • 240-pin DIMM form factor fits DFI LANPARTY LP JR 790GX-M2RS
  • 100 % compatible memory kit for DFI LANPARTY LP JR 790GX-M2RS

6 GB DDR2 kit for DFI LANPARTY LP JR 790GX-M2RS

This 6 GB kit contains three 2 GB DDR2 DIMMs built to run at 667 MHz with PC2-5400 and PC2-5300 ratings. The 240-pin modules are validated for full compatibility with the DFI LANPARTY LP JR 790GX-M2RS motherboard. It suits owners of that board who need the maximum supported memory in a matched set.

Sustained load behaviour on legacy DDR2 platform

Under continuous use the modules operate at the rated 667 MHz without exceeding the standard DDR2 voltage envelope. The three-stick population fills every slot on the target board, so memory density is fixed at 6 GB. Builders who want more capacity or a faster memory standard cannot use this kit.

Helstu kostir

  • 6 GB total capacity from three 2 GB modules
  • DDR2 667 MHz speed rated at PC2 5400 and PC2 5300
  • 240-pin DIMM form factor fits DFI LANPARTY LP JR 790GX-M2RS
  • 100 % compatible memory kit for DFI LANPARTY LP JR 790GX-M2RS

Tæknilýsing

Capacity6GB (3 x 2GB)

Spurningar um þessa vöru

How much power does this DDR2 kit draw when the system runs all day?

DDR2 DIMMs at 667 MHz typically draw a few watts per module, so the three 2 GB sticks together add only a small load to the motherboard power budget.

What motherboard slot must my board provide for these three 240-pin modules to work?

The kit requires three DDR2 DIMM sockets; the DFI LANPARTY LP JR 790GX-M2RS has four, so all three sticks will fit.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.