Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Simmtec, Inc

Simmtec, Inc 6GB (3 x 2GB) DDR2 DIMM 240 PIN 667Mhz PC2 5400 / PC2 5300 FOR DFI LANPARTY LP JR 790GX-M2RS

SKU CH-HQGP-90QRG

6GB DDR2 kit with three 2GB DIMMs running at 667MHz PC2-5400/5300 for DFI LANPARTY LP JR 790GX-M2RS motherboards

  • Capacity6GB (3 x 2GB)
  • 6 GB total capacity from three 2 GB modules
  • DDR2 667 MHz speed rated at PC2 5400 and PC2 5300
  • 240-pin DIMM form factor fits DFI LANPARTY LP JR 790GX-M2RS
  • 100 % compatible memory kit for DFI LANPARTY LP JR 790GX-M2RS

6 GB DDR2 kit for DFI LANPARTY LP JR 790GX-M2RS

This 6 GB kit contains three 2 GB DDR2 DIMMs built to run at 667 MHz with PC2-5400 and PC2-5300 ratings. The 240-pin modules are validated for full compatibility with the DFI LANPARTY LP JR 790GX-M2RS motherboard. It suits owners of that board who need the maximum supported memory in a matched set.

Sustained load behaviour on legacy DDR2 platform

Under continuous use the modules operate at the rated 667 MHz without exceeding the standard DDR2 voltage envelope. The three-stick population fills every slot on the target board, so memory density is fixed at 6 GB. Builders who want more capacity or a faster memory standard cannot use this kit.

Kohokohdat

  • 6 GB total capacity from three 2 GB modules
  • DDR2 667 MHz speed rated at PC2 5400 and PC2 5300
  • 240-pin DIMM form factor fits DFI LANPARTY LP JR 790GX-M2RS
  • 100 % compatible memory kit for DFI LANPARTY LP JR 790GX-M2RS

Tekniset tiedot

Capacity6GB (3 x 2GB)

Kysymyksiä tästä tuotteesta

How much power does this DDR2 kit draw when the system runs all day?

DDR2 DIMMs at 667 MHz typically draw a few watts per module, so the three 2 GB sticks together add only a small load to the motherboard power budget.

What motherboard slot must my board provide for these three 240-pin modules to work?

The kit requires three DDR2 DIMM sockets; the DFI LANPARTY LP JR 790GX-M2RS has four, so all three sticks will fit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.