Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green PCB adapter card with M.2 slot, SATA and SFF-8654 connectors

SMUGDESK

SMUGDESK M.2 SATA & NVMe to SATA + SFF-8654 Adapter

SKU CH-N9A5-D8GFP

Converts 22-pin M.2 SATA drives to SATA and M.2 NVMe drives to SFF-8654 for desktop motherboard storage expansion

  • Converts M.2 SATA SSDs to standard SATA interface
  • Converts M.2 NVMe SSDs to SFF-8654 interface
  • Supports 22Pin M.2 solid-state drives for flexible upgrades
  • Optimized circuitry ensures stable SSD read and write performance
  • Compact PCB design saves chassis space and eases cable routing

Dual-Protocol M.2 Adapter

This adapter converts an M.2 SATA SSD to a standard SATA connection or an M.2 NVMe SSD to an SFF-8654 interface. It fits desktop motherboards with a 22-pin M.2 slot, letting you reuse existing drives for storage upgrades or data migration. The card works with mainstream operating systems without extra drivers. It is not for builders who need a PCIe x4 or U.2 connection for their NVMe drive.

Sustained Signal Stability

Professional control circuitry maintains steady signal transmission during continuous read and write operations. The optimised layout prevents the performance drops that can appear on simpler passive adapters under heavy workloads. Consistent throughput is preserved for long file transfers or backup jobs. It does not add active cooling, so airflow in the case still matters for the SSD itself.

Compact PCB for Tidy Builds

The mini-sized printed circuit board occupies minimal space inside the chassis, simplifying internal cable routing. Both SATA and SFF-8654 connectors are positioned for straightforward access during installation. The plug-and-play design means no jumpers or configuration switches to set. It is not for systems that lack a compatible 22-pin M.2 slot or the matching motherboard header for the chosen protocol.

Helstu kostir

  • Converts M.2 SATA SSDs to standard SATA interface
  • Converts M.2 NVMe SSDs to SFF-8654 interface
  • Supports 22Pin M.2 solid-state drives for flexible upgrades
  • Optimized circuitry ensures stable SSD read and write performance
  • Compact PCB design saves chassis space and eases cable routing

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

Does the 22-pin SATA connector on this adapter require extra power to run an M.2 SATA SSD continuously?

The adapter draws power directly from the motherboard SATA port, so no separate power cable is needed for an M.2 SATA SSD.

What motherboard interface must already be present to use the SFF-8654 connection for an M.2 NVMe SSD?

Your motherboard needs an available SFF-8654 port to accept the NVMe side of this adapter.

Will an older 22-pin M.2 SATA drive work on the SATA side while a newer NVMe drive uses the SFF-8654 side at the same time?

Yes, the card supports both protocols simultaneously through its separate SATA and SFF-8654 outputs.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.