Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green PCB adapter card with M.2 slot, SATA and SFF-8654 connectors

SMUGDESK

SMUGDESK M.2 SATA & NVMe to SATA + SFF-8654 Adapter

SKU CH-N9A5-D8GFP

Converts 22-pin M.2 SATA drives to SATA and M.2 NVMe drives to SFF-8654 for desktop motherboard storage expansion

  • Converts M.2 SATA SSDs to standard SATA interface
  • Converts M.2 NVMe SSDs to SFF-8654 interface
  • Supports 22Pin M.2 solid-state drives for flexible upgrades
  • Optimized circuitry ensures stable SSD read and write performance
  • Compact PCB design saves chassis space and eases cable routing

Dual-Protocol M.2 Adapter

This adapter converts an M.2 SATA SSD to a standard SATA connection or an M.2 NVMe SSD to an SFF-8654 interface. It fits desktop motherboards with a 22-pin M.2 slot, letting you reuse existing drives for storage upgrades or data migration. The card works with mainstream operating systems without extra drivers. It is not for builders who need a PCIe x4 or U.2 connection for their NVMe drive.

Sustained Signal Stability

Professional control circuitry maintains steady signal transmission during continuous read and write operations. The optimised layout prevents the performance drops that can appear on simpler passive adapters under heavy workloads. Consistent throughput is preserved for long file transfers or backup jobs. It does not add active cooling, so airflow in the case still matters for the SSD itself.

Compact PCB for Tidy Builds

The mini-sized printed circuit board occupies minimal space inside the chassis, simplifying internal cable routing. Both SATA and SFF-8654 connectors are positioned for straightforward access during installation. The plug-and-play design means no jumpers or configuration switches to set. It is not for systems that lack a compatible 22-pin M.2 slot or the matching motherboard header for the chosen protocol.

Kohokohdat

  • Converts M.2 SATA SSDs to standard SATA interface
  • Converts M.2 NVMe SSDs to SFF-8654 interface
  • Supports 22Pin M.2 solid-state drives for flexible upgrades
  • Optimized circuitry ensures stable SSD read and write performance
  • Compact PCB design saves chassis space and eases cable routing

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Does the 22-pin SATA connector on this adapter require extra power to run an M.2 SATA SSD continuously?

The adapter draws power directly from the motherboard SATA port, so no separate power cable is needed for an M.2 SATA SSD.

What motherboard interface must already be present to use the SFF-8654 connection for an M.2 NVMe SSD?

Your motherboard needs an available SFF-8654 port to accept the NVMe side of this adapter.

Will an older 22-pin M.2 SATA drive work on the SATA side while a newer NVMe drive uses the SFF-8654 side at the same time?

Yes, the card supports both protocols simultaneously through its separate SATA and SFF-8654 outputs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.