Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
White mini-tower case with SPCC side panel and rear 80mm fan

SOEYI

SOEYI V200 Micro ATX/ITX PC Case White

SKU CH-WVM4-M5NRQ

White mini-tower case for Micro ATX and ITX builds with room for 250 mm graphics cards and 140 mm CPU coolers

  • Typemini_tower
  • With Power SupplyNo
  • Power SupplyMicro ATX/ITX motherboards, HDD, SSD, VGA cards up to 250mm,
  • Motherboard CompatibilityMicro ATX/ITX motherboards, HDD, SSD, VGA cards up to 250mm,
  • Hot-Swap Drive Bays0
  • 80mm FansNo
  • Fits Micro ATX and ITX motherboards for compact builds
  • Holds graphics cards up to 250mm long for capable gaming
  • Accepts CPU coolers up to 140mm tall for effective cooling
  • Includes two 3.5in and two 2.5in drive bays for flexible storage
  • Rear 80mm fan mount provides direct exhaust airflow

Compact Micro ATX/ITX Chassis

The SOEYI V200 is a mini-tower case built for Micro ATX and ITX motherboards. It suits small-form-factor office or home builds where desk space is limited. A single rear 80mm fan position provides basic airflow. The SPCC steel side panel gives a clean, professional look.

Drive and Expansion Capacity

Two 3.5-inch HDD bays and two 2.5-inch SSD mounts handle modest storage needs. Graphics cards up to 250mm fit comfortably, while CPU coolers up to 140mm tall are supported. Builds requiring more than four drives or longer GPUs will need a larger enclosure.

Thermals Noise and Power

The included rear 80mm fan exhausts heat from the compact 260 x 165 x 378mm interior. An ATX 12V PSU fits in the standard PS/2 location, keeping cable routing straightforward. With only one fan mount, high-wattage components may run warmer under sustained load.

Helstu kostir

  • Fits Micro ATX and ITX motherboards for compact builds
  • Holds graphics cards up to 250mm long for capable gaming
  • Accepts CPU coolers up to 140mm tall for effective cooling
  • Includes two 3.5in and two 2.5in drive bays for flexible storage
  • Rear 80mm fan mount provides direct exhaust airflow

Tæknilýsing

BrandSOEYi
ModelV200
Typemini_tower
With Power SupplyNo
Power SupplyMicro ATX/ITX motherboards, HDD, SSD, VGA cards up to 250mm, CPU coolers up to 140mm
Motherboard CompatibilityMicro ATX/ITX motherboards, HDD, SSD, VGA cards up to 250mm, CPU coolers up to 140mm
Hot-Swap Drive Bays0
80mm FansNo
Max GPU LengthMicro ATX/ITX motherboards, HDD, SSD, VGA cards up to 250mm, CPU coolers up to 140mm
Max CPU Cooler HeightMicro ATX/ITX motherboards, HDD, SSD, VGA cards up to 250mm, CPU coolers up to 140mm
Dimensions260.0 in x 165.0 in x 353.0 in

Spurningar um þessa vöru

Will my existing ATX power supply fit the SOEYI V200 case?

Yes, the chassis accepts a standard ATX PSU, so your current unit will mount without an adapter.

How can I verify that the included rear 80 mm fan is running after I build the system?

Power on the PC and listen for airflow at the rear grille; the single 80 mm fan should spin visibly and move air out of the case.

Which drives and cables come in the box, and what must I source separately?

The case includes mounting brackets for two 3.5″ HDDs and two 2.5″ SSDs, plus the rear 80 mm fan; you must supply the motherboard, CPU cooler, graphics card, power supply, storage drives and all data cables.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.