Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White mini-tower case with SPCC side panel and rear 80mm fan

SOEYI

SOEYI V200 Micro ATX/ITX PC Case White

SKU CH-WVM4-M5NRQ

White mini-tower case for Micro ATX and ITX builds with room for 250 mm graphics cards and 140 mm CPU coolers

  • Typemini_tower
  • With Power SupplyNo
  • Power SupplyMicro ATX/ITX motherboards, HDD, SSD, VGA cards up to 250mm,
  • Motherboard CompatibilityMicro ATX/ITX motherboards, HDD, SSD, VGA cards up to 250mm,
  • Hot-Swap Drive Bays0
  • 80mm FansNo
  • Fits Micro ATX and ITX motherboards for compact builds
  • Holds graphics cards up to 250mm long for capable gaming
  • Accepts CPU coolers up to 140mm tall for effective cooling
  • Includes two 3.5in and two 2.5in drive bays for flexible storage
  • Rear 80mm fan mount provides direct exhaust airflow

Compact Micro ATX/ITX Chassis

The SOEYI V200 is a mini-tower case built for Micro ATX and ITX motherboards. It suits small-form-factor office or home builds where desk space is limited. A single rear 80mm fan position provides basic airflow. The SPCC steel side panel gives a clean, professional look.

Drive and Expansion Capacity

Two 3.5-inch HDD bays and two 2.5-inch SSD mounts handle modest storage needs. Graphics cards up to 250mm fit comfortably, while CPU coolers up to 140mm tall are supported. Builds requiring more than four drives or longer GPUs will need a larger enclosure.

Thermals Noise and Power

The included rear 80mm fan exhausts heat from the compact 260 x 165 x 378mm interior. An ATX 12V PSU fits in the standard PS/2 location, keeping cable routing straightforward. With only one fan mount, high-wattage components may run warmer under sustained load.

Kohokohdat

  • Fits Micro ATX and ITX motherboards for compact builds
  • Holds graphics cards up to 250mm long for capable gaming
  • Accepts CPU coolers up to 140mm tall for effective cooling
  • Includes two 3.5in and two 2.5in drive bays for flexible storage
  • Rear 80mm fan mount provides direct exhaust airflow

Tekniset tiedot

BrandSOEYi
ModelV200
Typemini_tower
With Power SupplyNo
Power SupplyMicro ATX/ITX motherboards, HDD, SSD, VGA cards up to 250mm, CPU coolers up to 140mm
Motherboard CompatibilityMicro ATX/ITX motherboards, HDD, SSD, VGA cards up to 250mm, CPU coolers up to 140mm
Hot-Swap Drive Bays0
80mm FansNo
Max GPU LengthMicro ATX/ITX motherboards, HDD, SSD, VGA cards up to 250mm, CPU coolers up to 140mm
Max CPU Cooler HeightMicro ATX/ITX motherboards, HDD, SSD, VGA cards up to 250mm, CPU coolers up to 140mm
Dimensions260.0 in x 165.0 in x 353.0 in

Kysymyksiä tästä tuotteesta

Will my existing ATX power supply fit the SOEYI V200 case?

Yes, the chassis accepts a standard ATX PSU, so your current unit will mount without an adapter.

How can I verify that the included rear 80 mm fan is running after I build the system?

Power on the PC and listen for airflow at the rear grille; the single 80 mm fan should spin visibly and move air out of the case.

Which drives and cables come in the box, and what must I source separately?

The case includes mounting brackets for two 3.5″ HDDs and two 2.5″ SSDs, plus the rear 80 mm fan; you must supply the motherboard, CPU cooler, graphics card, power supply, storage drives and all data cables.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.