Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 2.5 inch SATA SSD labelled Solidigm D3-S4620 3.84TB

Solidigm

Solidigm D3-S4620 3.84TB 2.5" SATA enterprise SSD SSDSC2KG038TZ01

SKU CH-7JQK-C9SP3 MPN SSDSC2KG038TZ01

A 3.84 TB 2.5 inch SATA enterprise SSD built with 144L TLC 3D NAND for read-intensive server workloads

  • Form Factor2.5"
  • Capacity3.84TB
  • Memory Components144L TLC 3D NAND
  • InterfaceSATA III
  • Max Sequential ReadUp to 550 MBps
  • Max Sequential WriteUp to 510 MBps

Options 3.84TB 2.5"

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • 84 TB capacity stores large datasets
  • SATA III interface delivers up to 550 MB/s sequential read speed
  • 144-layer TLC 3D NAND provides mid-endurance reliability for servers
  • 1,000 G shock resistance protects data during operation
  • Operating range 0 °C to 70 °C suits data-centre environments

Capacity and Interface

This Solidigm D3-S4620 drive provides 3.84TB of storage in a 2.5" form factor with a SATA III interface. It uses 144L TLC 3D NAND to deliver sequential reads up to 550 MBps and writes up to 510 MBps. The drive is built for server environments and operates between 0°C and 70°C.

Read-Intensive Workloads vs Write-Heavy Demands

The mid-endurance design suits read-intensive applications such as web hosting, content delivery or boot volumes where write cycles remain moderate. It is not a fit for write-heavy workloads such as heavy database logging, high-frequency transaction processing or sustained video ingest that exceed its endurance rating.

Endurance Class Decides Suitability

The single specification that determines fit is the mid-endurance rating inherent to the D3-S4620 series. If the target workload demands higher write endurance, this drive will wear out too quickly; if the workload is read-centric, the capacity and SATA interface make it a direct replacement for legacy hard disk drives.

Helstu kostir

  • 84 TB capacity stores large datasets
  • SATA III interface delivers up to 550 MB/s sequential read speed
  • 144-layer TLC 3D NAND provides mid-endurance reliability for servers
  • 1,000 G shock resistance protects data during operation
  • Operating range 0 °C to 70 °C suits data-centre environments

Tæknilýsing

BrandSolidigm
SeriesD3-S4620
ModelD3-S4620
Form Factor2.5"
Capacity3.84TB
Memory Components144L TLC 3D NAND
InterfaceSATA III
Max Sequential ReadUp to 550 MBps
Max Sequential WriteUp to 510 MBps
Operating Temperature0°C ~ +70°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Sendingarþyngd0.91 kg
Stærð sendingar178 × 102 × 51 mm

Aðrar útgáfur af þessari vöru

2 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How many drive writes per day is the 3.84TB D3-S4620 rated for over its warranty period?

The D3-S4620 series is a mid-endurance SATA drive; its 3.84TB model is rated for one full drive write per day over the warranty period.

What is the sustained sequential write speed once the SLC cache is exhausted on this 3.84TB SATA SSD?

The maximum sequential write speed is specified as up to 510 MBps, which is the sustained limit under continuous load.

What is the maximum operating temperature before the 2.5" D3-S4620 begins to throttle during all-day server use?

The drive is rated to operate from 0°C to 70°C; sustained heavy workloads at the top of this range may trigger thermal throttling.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.