Sudokoo
Sudokoo MACH140 US 140mm case fan 30mm 500-2200 RPM 129 CFM 5.91 mmAq
- 1 Fan
- No Controller
26,99 USD31,24 USD−14%
0.0003472BTC
Til á lager
Sudokoo
Sudokoo R-MACH120-GYWPN1-GAS 120mm 30mm case fan 500-3000 RPM
120 mm case fan with 30 mm frame, 500-3000 RPM range and 108 CFM airflow
- Fan Counts1 Fan
- TypeCase Fan
- CompatibilityCase
- Fan Size120x120x30 mm
- Fan Thickness30mm
- Bearing TypeHybrid Hydraulic Bearing
Model 120mm
- 120mm
- 140mm
Option 1 Pack
- 1 Pack
- 3 Packs
- FOC motor reaches 3000 RPM for strong airflow
- 108 CFM and 7.31 mmAq pressure cool dense radiators
- Hybrid hydraulic bearing keeps noise below 39.9 dB(A)
- LCP blades with 40% glass fibre resist warping at speed
- 30 mm thick frame compresses air for efficient cooling
Sudokoo MACH120 120 mm 30 mm Case Fan
The Sudokoo MACH120 is a single 120 mm case fan with a 30 mm thick frame designed for high static pressure cooling. It uses a 3-phase 10-pole 12-slot FOC motor with a hybrid hydraulic bearing and liquid crystal polymer blades reinforced with 40 % glass fibre. Speed is controlled via a 4-pin PWM connector across a 500-3000 RPM range.
Builders targeting dense radiators
The thick 30 mm frame and 7.31 mmAq static pressure suit builders who need strong airflow through dense fin stacks. The hybrid hydraulic bearing and sub-39.9 dB(A) noise level also fit quiet-focused systems. Users who require RGB lighting or a slimmer profile for tight clearances should consider other models.
30 mm frame depth for radiator clearance
The 30 mm thickness directly determines whether the fan clears a radiator or heatsink in your build. Verify that your case or mounting hardware accepts a 30 mm fan before purchasing.
Helstu kostir
- FOC motor reaches 3000 RPM for strong airflow
- 108 CFM and 7.31 mmAq pressure cool dense radiators
- Hybrid hydraulic bearing keeps noise below 39.9 dB(A)
- LCP blades with 40% glass fibre resist warping at speed
- 30 mm thick frame compresses air for efficient cooling
Tæknilýsing
| Part Number | R-MACH120-GYWPN1-GAS |
|---|---|
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120x120x30 mm |
| Fan Thickness | 30mm |
| Bearing Type | Hybrid Hydraulic Bearing |
| RPM | 500~3000 RPM+-10% |
| Air Flow | 108 CFM |
| Air Pressure | 7.31 mmAq |
| Noise Level | <39.9 dB(A) |
| Power Connector | 4-pin PWM |
| Color | Black Gray |
| Dimensions | 120x120x30 mm(LxWxH) |
| Sendingarþyngd | 0.47 kg |
| Stærð sendingar | 219 × 181 × 38 mm |
Aðrar útgáfur af þessari vöru
2 í viðbót í sama vöruflokki
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
Sudokoo
Sudokoo MACH120 3in1 120mm case fan 3-pack 500-3000 RPM
- 3 Fans
- No Controller
59,99 USD
0.00077171BTC
Til á lagerSpurningar um þessa vöru
How do I install the 120mm 30mm fan in my case and what step do people get wrong?
Mount the fan using the four corner holes with the supplied screws, then connect the 4-pin PWM header to the motherboard. The common mistake is forgetting to enable PWM control in BIOS so the fan stays at a fixed speed instead of following the 500-3000 RPM curve.
What maintenance or replacement will the hybrid hydraulic bearing need later?
The dual-circuit hybrid hydraulic bearing is sealed for life and requires no lubrication. If noise rises above the rated 39.9 dB(A) after several years, replace the entire fan unit — bearings are not user-serviceable.
At what point does the 7.31 mmAq static pressure limit show up first under sustained load?
The 7.31 mmAq static-pressure ceiling is reached when the fan hits 3000 RPM against a dense radiator or filter. Beyond that point airflow drops sharply while noise approaches the 39.9 dB(A) maximum.
Einnig í þessum vöruflokki
Fólk bar þetta saman
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 USD
0.00051443BTC
Til á lager