Sudokoo MACH140 US 140mm case fan 30mm 500-2200 RPM 129 CFM 5.91 mmAq
- 1 Fan
- No Controller
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Sudokoo
120 mm case fan with 30 mm frame, 500-3000 RPM range and 108 CFM airflow
Model 120mm
Option 1 Pack
The Sudokoo MACH120 is a single 120 mm case fan with a 30 mm thick frame designed for high static pressure cooling. It uses a 3-phase 10-pole 12-slot FOC motor with a hybrid hydraulic bearing and liquid crystal polymer blades reinforced with 40 % glass fibre. Speed is controlled via a 4-pin PWM connector across a 500-3000 RPM range.
The thick 30 mm frame and 7.31 mmAq static pressure suit builders who need strong airflow through dense fin stacks. The hybrid hydraulic bearing and sub-39.9 dB(A) noise level also fit quiet-focused systems. Users who require RGB lighting or a slimmer profile for tight clearances should consider other models.
The 30 mm thickness directly determines whether the fan clears a radiator or heatsink in your build. Verify that your case or mounting hardware accepts a 30 mm fan before purchasing.
| Part Number | R-MACH120-GYWPN1-GAS |
|---|---|
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120x120x30 mm |
| Fan Thickness | 30mm |
| Bearing Type | Hybrid Hydraulic Bearing |
| RPM | 500~3000 RPM+-10% |
| Air Flow | 108 CFM |
| Air Pressure | 7.31 mmAq |
| Noise Level | <39.9 dB(A) |
| Power Connector | 4-pin PWM |
| Color | Black Gray |
| Dimensions | 120x120x30 mm(LxWxH) |
| Sūtījuma svars | 0.47 kg |
| Sūtījuma izmēri | 219 × 181 × 38 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Mount the fan using the four corner holes with the supplied screws, then connect the 4-pin PWM header to the motherboard. The common mistake is forgetting to enable PWM control in BIOS so the fan stays at a fixed speed instead of following the 500-3000 RPM curve.
The dual-circuit hybrid hydraulic bearing is sealed for life and requires no lubrication. If noise rises above the rated 39.9 dB(A) after several years, replace the entire fan unit — bearings are not user-serviceable.
The 7.31 mmAq static-pressure ceiling is reached when the fan hits 3000 RPM against a dense radiator or filter. Beyond that point airflow drops sharply while noise approaches the 39.9 dB(A) maximum.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?