Sudokoo R-MACH120-GYWPN1-GAS 120mm 30mm case fan 500-3000 RPM
- 1 Fan
- Case Fan
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Sudokoo
A 140 mm case fan with a 30 mm thick frame, PWM control from 500 to 2200 RPM, 129 CFM airflow and 5.91 mmAq static pressure
Model 140mm
Option 1 Pack
The Sudokoo MACH140 US is a 140mm case fan with a 30mm thick frame designed for high static pressure. It uses a 3-phase 10-pole 12-slot FOC motor with neodymium magnets and a 4-pin PWM connector for speed control between 500 and 2200 RPM. This single fan targets builders who need focused airflow through dense fin stacks or radiators.
Liquid Crystal Polymer blades reinforced with 40% glass fibre resist warping at high RPM. The custom hybrid hydraulic bearing from PORITE CORPORATION uses dual oil circuits and brass tubes for durability. The 4-pin PWM connector allows motherboard speed control down to 0 RPM below 5% duty cycle. A transparent motor window houses switchable white LEDs for visual customisation.
Maximum airflow reaches 129 CFM at 2200 RPM with 5.91 mmAq static pressure. Noise stays under 39.9 dB(A) at full speed. The fan draws 0.45 A at 12 VDC for 5.4 W total power. Buyers who need higher airflow at lower noise or who require a bundled fan controller will not find those features here.
| Model | MACH 140 |
|---|---|
| Part Number | R-MACH140-GYWPN1-GAS |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 140mm |
| Fan Thickness | 30mm |
| Bearing Type | Hybrid Hydraulic Bearing |
| RPM | 500~2200 RPM+-10% |
| Air Flow | 129 CFM |
| Air Pressure | 5.91 mmAq |
| Noise Level | <39.9 dB(A) |
| Power Connector | 4-pin PWM |
| Color | Black Gray |
| Dimensions | 140x140x30 mm |
| Sūtījuma svars | 0.54 kg |
| Sūtījuma izmēri | 239 × 200 × 38 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The 4-pin PWM connector enables motherboard speed control from 500 to 2200 RPM ±10%, and the fan can stop completely below 5% PWM duty cycle.
The fan measures 140×140×30 mm, so verify your case supports 30 mm thick 140 mm mounts and that the cooler has at least 30 mm clearance above the heatsink.
Mount with the four corner screws using the arrows on the frame: the arrow pointing along the blade curve shows airflow direction, so aim it toward the heatsink or exhaust vent.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?