Sudokoo R-MACH120-GYWPN1-GAS 120mm 30mm case fan 500-3000 RPM
- 1 Fan
- Case Fan
Sudokoo
A 140 mm case fan with a 30 mm thick frame, PWM control from 500 to 2200 RPM, 129 CFM airflow and 5.91 mmAq static pressure
Model 140mm
Option 1 Pack
The Sudokoo MACH140 US is a 140mm case fan with a 30mm thick frame designed for high static pressure. It uses a 3-phase 10-pole 12-slot FOC motor with neodymium magnets and a 4-pin PWM connector for speed control between 500 and 2200 RPM. This single fan targets builders who need focused airflow through dense fin stacks or radiators.
Liquid Crystal Polymer blades reinforced with 40% glass fibre resist warping at high RPM. The custom hybrid hydraulic bearing from PORITE CORPORATION uses dual oil circuits and brass tubes for durability. The 4-pin PWM connector allows motherboard speed control down to 0 RPM below 5% duty cycle. A transparent motor window houses switchable white LEDs for visual customisation.
Maximum airflow reaches 129 CFM at 2200 RPM with 5.91 mmAq static pressure. Noise stays under 39.9 dB(A) at full speed. The fan draws 0.45 A at 12 VDC for 5.4 W total power. Buyers who need higher airflow at lower noise or who require a bundled fan controller will not find those features here.
| Model | MACH 140 |
|---|---|
| Part Number | R-MACH140-GYWPN1-GAS |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 140mm |
| Fan Thickness | 30mm |
| Bearing Type | Hybrid Hydraulic Bearing |
| RPM | 500~2200 RPM+-10% |
| Air Flow | 129 CFM |
| Air Pressure | 5.91 mmAq |
| Noise Level | <39.9 dB(A) |
| Power Connector | 4-pin PWM |
| Color | Black Gray |
| Dimensions | 140x140x30 mm |
| 出貨重量 | 0.54 kg |
| 包裝尺寸 | 239 × 200 × 38 mm |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The 4-pin PWM connector enables motherboard speed control from 500 to 2200 RPM ±10%, and the fan can stop completely below 5% PWM duty cycle.
The fan measures 140×140×30 mm, so verify your case supports 30 mm thick 140 mm mounts and that the cooler has at least 30 mm clearance above the heatsink.
Mount with the four corner screws using the arrows on the frame: the arrow pointing along the blade curve shows airflow direction, so aim it toward the heatsink or exhaust vent.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?