Tripp Lite
Tripp Lite PDUMNH15 Monitored 1U PDU 120V 15A 8x 5-15R
- Monitored
- 1U
328,99 USD
0.00419705BTC
Til á lager
SunnyStar Co., Ltd
SunnyStar Co., Ltd D60SH-12 60mm 25mm 12V .18A 2 Pin case fan
A 60 mm sleeve-bearing case fan running at up to 1600 RPM on 12 V .18 A with a 2-pin connector
- TypeCase Fan
- Fan Size60mm
- Bearing TypeSleeve bearing
- RPM<1600 RPM
- Power Connector2 Pin
- ColorBlack
- Compact 60 mm frame fits tight chassis spaces
- Sleeve bearing runs under 1600 RPM for quiet airflow
- 12 V, 0.18 A draw keeps power use low
- Two-pin connector plugs straight into legacy headers
- Non-LED black design stays invisible in dark builds
Compact 60 mm case fan for tight builds
The SunnyStar D60SH-12 is a 60 mm square frame fan designed for small-form-factor cases or peripheral cooling where space is limited. It runs on 12 V DC and draws .18 A through a standard 2 pin power connector. The black non-LED housing keeps the appearance neutral for any build theme.
Sleeve bearing runs below 1600 RPM
A sleeve bearing keeps acoustic output low at the rated speed ceiling of <1600 RPM. Power draw stays modest at .18 A on the 12 V rail, so the fan adds minimal load to the system supply. The 25 mm thickness fits standard 60 mm mounting points without clearance issues.
Two-wire lead simplifies installation
The 2 pin connector plugs directly into motherboard or controller headers without adapters. No lighting or PWM circuitry means there is no software to configure and no extra cables to route. The package contains only the fan unit itself.
Helstu kostir
- Compact 60 mm frame fits tight chassis spaces
- Sleeve bearing runs under 1600 RPM for quiet airflow
- 12 V, 0.18 A draw keeps power use low
- Two-pin connector plugs straight into legacy headers
- Non-LED black design stays invisible in dark builds
Tæknilýsing
| Series | D60SH-12 |
|---|---|
| Model | D60SH-12 |
| Type | Case Fan |
| Fan Size | 60mm |
| Bearing Type | Sleeve bearing |
| RPM | <1600 RPM |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 60*60*25mm |
Spurningar um þessa vöru
How do I install the 60mm 2-pin fan in a 12V header without reversing polarity?
Align the two wires with the 12V header pins, match the red wire to the positive pin, press the 60*60*25mm frame into the mounting holes, and secure with four screws.
When will the sleeve bearing need replacement?
The sleeve bearing typically lasts several years at <1600 RPM; expect increased noise or RPM drop as the lubricant ages, then swap the fan.
At what RPM does airflow plateau under sustained load?
The fan caps at <1600 RPM, so airflow stops increasing once that ceiling is reached during continuous operation.
Einnig í þessum vöruflokki
Fólk bar þetta saman
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
