Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 60mm square case fan 25mm thick 2 pin connector

SunnyStar Co., Ltd

SunnyStar Co., Ltd D60SH-12 60mm 25mm 12V .18A 2 Pin case fan

SKU CH-FSZP-DSWJP

A 60 mm sleeve-bearing case fan running at up to 1600 RPM on 12 V .18 A with a 2-pin connector

  • TypeCase Fan
  • Fan Size60mm
  • Bearing TypeSleeve bearing
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • Compact 60 mm frame fits tight chassis spaces
  • Sleeve bearing runs under 1600 RPM for quiet airflow
  • 12 V, 0.18 A draw keeps power use low
  • Two-pin connector plugs straight into legacy headers
  • Non-LED black design stays invisible in dark builds

Compact 60 mm case fan for tight builds

The SunnyStar D60SH-12 is a 60 mm square frame fan designed for small-form-factor cases or peripheral cooling where space is limited. It runs on 12 V DC and draws .18 A through a standard 2 pin power connector. The black non-LED housing keeps the appearance neutral for any build theme.

Sleeve bearing runs below 1600 RPM

A sleeve bearing keeps acoustic output low at the rated speed ceiling of <1600 RPM. Power draw stays modest at .18 A on the 12 V rail, so the fan adds minimal load to the system supply. The 25 mm thickness fits standard 60 mm mounting points without clearance issues.

Two-wire lead simplifies installation

The 2 pin connector plugs directly into motherboard or controller headers without adapters. No lighting or PWM circuitry means there is no software to configure and no extra cables to route. The package contains only the fan unit itself.

Puncte forte

  • Compact 60 mm frame fits tight chassis spaces
  • Sleeve bearing runs under 1600 RPM for quiet airflow
  • 12 V, 0.18 A draw keeps power use low
  • Two-pin connector plugs straight into legacy headers
  • Non-LED black design stays invisible in dark builds

Specificații

SeriesD60SH-12
ModelD60SH-12
TypeCase Fan
Fan Size60mm
Bearing TypeSleeve bearing
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*25mm

Întrebări despre acest articol

How do I install the 60mm 2-pin fan in a 12V header without reversing polarity?

Align the two wires with the 12V header pins, match the red wire to the positive pin, press the 60*60*25mm frame into the mounting holes, and secure with four screws.

When will the sleeve bearing need replacement?

The sleeve bearing typically lasts several years at <1600 RPM; expect increased noise or RPM drop as the lubricant ages, then swap the fan.

At what RPM does airflow plateau under sustained load?

The fan caps at <1600 RPM, so airflow stops increasing once that ceiling is reached during continuous operation.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.