Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

SXDOOL

SXDOOL 3615KL-09W-B76 92mm 50V 8200RPM 3-pin server case fan

SKU CH-8785-9D14Z

A 92×38 mm server case fan spinning at 8200 RPM with a high-precision ball bearing rated for 180000 hours

  • Fan Size90mm
  • RPM8200RPM
  • Noise Level79dBA
  • Power Connector3 Pin
  • ColorBlack
  • High airflow at 8200 RPM for dense server cooling
  • 50 VDC input suits industrial power architectures
  • High-precision ball bearing rated for 180000 hours
  • Flame-retardant PBT frame meets VO safety class
  • Wide operating range from -10 to +70 °C

92mm 50V Server Fan

The SXDOOL 3615KL-09W-B76 is a 92mm by 38mm case fan rated for 50VDC input. It spins at 8200RPM using a high-precision ball bearing and draws 0.60A for 30W of power. A three-wire connector supplies power and a tachometer signal. The frame and blades are moulded from glass-filled PBT with a VO flame rating.

Suited for 50V server chassis

This unit fits servers and industrial enclosures that provide a 50VDC rail and accept a 92mm square footprint. The counter-clockwise rotation and 79dBA output are fixed characteristics. Builds that require a different supply voltage, a lower noise floor, or a standard 4-pin PWM interface should look at other models.

50VDC operating voltage

The fan operates only within plus or minus 15% of the rated 50VDC supply. Insulation resistance exceeds 500 megohms and the part withstands a 500V dielectric test. Service life is rated at 180,000 hours at 25°C ambient with 45–85% relative humidity.

Helstu kostir

  • High airflow at 8200 RPM for dense server cooling
  • 50 VDC input suits industrial power architectures
  • High-precision ball bearing rated for 180000 hours
  • Flame-retardant PBT frame meets VO safety class
  • Wide operating range from -10 to +70 °C

Tæknilýsing

Fan Size90mm
RPM8200RPM
Noise Level79dBA
Power Connector3 Pin
ColorBlack

Spurningar um þessa vöru

What voltage power supply does the 50VDC fan require to operate?

The fan runs on a 50VDC supply with a tolerance of plus or minus 15% of the rated voltage.

Will the 3-pin connector work with a motherboard header that only supports 4-pin PWM control?

The 3-pin connector fits a standard 3-pin header; on a 4-pin header it will run at full 8200RPM without PWM speed regulation.

How can I confirm the fan is spinning at its rated 8200RPM after installation?

Monitor the RPM reading in BIOS or hardware-monitoring software; it should report close to 8200RPM when the fan receives full 50VDC power.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.