SXDOOL
SXDOOL 3615KL-09W-B76 92mm 50V 8200RPM 3-pin server case fan
A 92×38 mm server case fan spinning at 8200 RPM with a high-precision ball bearing rated for 180000 hours
- Fan Size90mm
- RPM8200RPM
- Noise Level79dBA
- Power Connector3 Pin
- ColorBlack
- High airflow at 8200 RPM for dense server cooling
- 50 VDC input suits industrial power architectures
- High-precision ball bearing rated for 180000 hours
- Flame-retardant PBT frame meets VO safety class
- Wide operating range from -10 to +70 °C
92mm 50V Server Fan
The SXDOOL 3615KL-09W-B76 is a 92mm by 38mm case fan rated for 50VDC input. It spins at 8200RPM using a high-precision ball bearing and draws 0.60A for 30W of power. A three-wire connector supplies power and a tachometer signal. The frame and blades are moulded from glass-filled PBT with a VO flame rating.
Suited for 50V server chassis
This unit fits servers and industrial enclosures that provide a 50VDC rail and accept a 92mm square footprint. The counter-clockwise rotation and 79dBA output are fixed characteristics. Builds that require a different supply voltage, a lower noise floor, or a standard 4-pin PWM interface should look at other models.
50VDC operating voltage
The fan operates only within plus or minus 15% of the rated 50VDC supply. Insulation resistance exceeds 500 megohms and the part withstands a 500V dielectric test. Service life is rated at 180,000 hours at 25°C ambient with 45–85% relative humidity.
Pluspunten
- High airflow at 8200 RPM for dense server cooling
- 50 VDC input suits industrial power architectures
- High-precision ball bearing rated for 180000 hours
- Flame-retardant PBT frame meets VO safety class
- Wide operating range from -10 to +70 °C
Specificaties
| Fan Size | 90mm |
|---|---|
| RPM | 8200RPM |
| Noise Level | 79dBA |
| Power Connector | 3 Pin |
| Color | Black |
Vragen over dit artikel
What voltage power supply does the 50VDC fan require to operate?
The fan runs on a 50VDC supply with a tolerance of plus or minus 15% of the rated voltage.
Will the 3-pin connector work with a motherboard header that only supports 4-pin PWM control?
The 3-pin connector fits a standard 3-pin header; on a 4-pin header it will run at full 8200RPM without PWM speed regulation.
How can I confirm the fan is spinning at its rated 8200RPM after installation?
Monitor the RPM reading in BIOS or hardware-monitoring software; it should report close to 8200RPM when the fan receives full 50VDC power.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$ 0,82
0.00001047BTC
Op voorraad