Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Square black frame fan with three-wire connector

SXDOOL

SXDOOL FD124020EB 40x40x20mm 12V 0.12A 3-pin case fan

SKU CH-GH5D-SK76Q MPN FD124020EB

A 40×40×20 mm two-ball-bearing case fan running on 12 V at 0.12 A with a three-pin connector and flame-retardant PBT frame rated from -10 °C to +70 °C

  • Two-ball bearing reduces wear for longer service life
  • 12 V 0.12 A rating keeps power draw low
  • PBT frame with 30 % glass fibre adds structural rigidity
  • VO flame-retardant material meets fire-safety requirements
  • Operates from -10 °C to +70 °C for wide temperature range

Compact 12 V 3-pin case fan

The SXDOOL FD124020EB is a 40×40×20 mm axial fan rated at 12 V and 0.12 A, supplied in a pack of 10. Its two-ball bearing and counter-clockwise rotation suit system integrators and hobbyists who need quiet, reliable spot cooling for small-form-factor chassis, industrial enclosures or replacement of Y.S. Tech originals.

Check 3-pin header and clearance

Verify that your motherboard or fan controller provides a standard 3-pin header for the three-wire lead. Confirm the 40 mm square mounting pattern and 20 mm depth fit the intended location, and that the operating range of –10 °C to +70 °C covers the expected ambient temperatures.

Glass-fibre frame and two-ball bearing

The one-piece injection-moulded frame and blades use PBT with 30 % glass fibre and VO flame-retardant rating for rigidity and fire safety. Two high-precision ball bearings reduce friction noise and extend service life compared with sleeve alternatives, while the 3-pin connector allows simple voltage control or monitoring without PWM circuitry.

Helstu kostir

  • Two-ball bearing reduces wear for longer service life
  • 12 V 0.12 A rating keeps power draw low
  • PBT frame with 30 % glass fibre adds structural rigidity
  • VO flame-retardant material meets fire-safety requirements
  • Operates from -10 °C to +70 °C for wide temperature range

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

What is included in the 10-piece lot and do I need any extra cables or connectors?

The lot contains ten FD124020EB fans each with a 3-wire lead ending in a 3-pin connector that plugs directly into a standard motherboard header; no additional cables or adapters are required.

How do I choose between the available versions or capacities of this fan?

This model is offered only as the FD124020EB with a 12 V, 0.12 A rating, 40x40x20 mm frame, two-ball bearing and PBT plus 30 % glass-fibre construction; there are no alternative versions or capacities to select.

What does the 0.12 A current rating mean for actual power draw and motherboard header compatibility?

At the rated 12 V the fan draws 0.12 A, a low load that is well within the capability of a standard 3-pin motherboard fan header.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.