Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Square black frame fan with three-wire connector

SXDOOL

SXDOOL FD124020EB 40x40x20mm 12V 0.12A 3-pin case fan

SKU CH-GH5D-SK76Q MPN FD124020EB

A 40×40×20 mm two-ball-bearing case fan running on 12 V at 0.12 A with a three-pin connector and flame-retardant PBT frame rated from -10 °C to +70 °C

  • Two-ball bearing reduces wear for longer service life
  • 12 V 0.12 A rating keeps power draw low
  • PBT frame with 30 % glass fibre adds structural rigidity
  • VO flame-retardant material meets fire-safety requirements
  • Operates from -10 °C to +70 °C for wide temperature range

Compact 12 V 3-pin case fan

The SXDOOL FD124020EB is a 40×40×20 mm axial fan rated at 12 V and 0.12 A, supplied in a pack of 10. Its two-ball bearing and counter-clockwise rotation suit system integrators and hobbyists who need quiet, reliable spot cooling for small-form-factor chassis, industrial enclosures or replacement of Y.S. Tech originals.

Check 3-pin header and clearance

Verify that your motherboard or fan controller provides a standard 3-pin header for the three-wire lead. Confirm the 40 mm square mounting pattern and 20 mm depth fit the intended location, and that the operating range of –10 °C to +70 °C covers the expected ambient temperatures.

Glass-fibre frame and two-ball bearing

The one-piece injection-moulded frame and blades use PBT with 30 % glass fibre and VO flame-retardant rating for rigidity and fire safety. Two high-precision ball bearings reduce friction noise and extend service life compared with sleeve alternatives, while the 3-pin connector allows simple voltage control or monitoring without PWM circuitry.

Kohokohdat

  • Two-ball bearing reduces wear for longer service life
  • 12 V 0.12 A rating keeps power draw low
  • PBT frame with 30 % glass fibre adds structural rigidity
  • VO flame-retardant material meets fire-safety requirements
  • Operates from -10 °C to +70 °C for wide temperature range

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What is included in the 10-piece lot and do I need any extra cables or connectors?

The lot contains ten FD124020EB fans each with a 3-wire lead ending in a 3-pin connector that plugs directly into a standard motherboard header; no additional cables or adapters are required.

How do I choose between the available versions or capacities of this fan?

This model is offered only as the FD124020EB with a 12 V, 0.12 A rating, 40x40x20 mm frame, two-ball bearing and PBT plus 30 % glass-fibre construction; there are no alternative versions or capacities to select.

What does the 0.12 A current rating mean for actual power draw and motherboard header compatibility?

At the rated 12 V the fan draws 0.12 A, a low load that is well within the capability of a standard 3-pin motherboard fan header.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.