Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black sand-grain painted steel open test bench frame for ATX, Micro-ATX and ITX motherboards

TAURKENAM

TAURKENAM Open Chassis Test Bench Case Accessory

SKU CH-APYZ-35VAZ

Open test bench holds ATX, Micro-ATX and ITX boards up to 305×245 mm with standard ATX power supplies and unlimited graphics-card length

  • Open-air design gives unrestricted graphics-card clearance
  • 8 mm SPCC steel frame with baked black sand-grain finish
  • Fits ATX, Micro-ATX and ITX boards up to 305 x 245 mm
  • Accepts standard ATX PSU sized 150 x 86 x 140-250 mm
  • Wide-body layout promotes natural heat dissipation

Open Test Bench for ATX, Micro-ATX and ITX

This open chassis accessory is built from 0.8 mm SPCC steel with a baked black sand-grain finish. It accepts ATX, Micro-ATX and ITX motherboards up to 305 by 245 mm. The design suits builders who need quick component swaps and unobstructed airflow during testing or benchmarking sessions.

Fits Standard ATX Power Supplies

A standard ATX power supply measuring 150 by 86 by 140 to 250 mm mounts directly to the frame. Graphics card length and width are not limited by the bench itself; clearance depends only on the motherboard layout. This arrangement frees internal volume for oversized coolers or custom loop components that would not fit in a closed case.

Sustained Load Relies on Ambient Airflow

With no side panels or forced-air channels, heat dissipation depends entirely on the surrounding environment and the coolers installed on the components. Under prolonged heavy loads the open frame prevents heat soak inside an enclosure, but it offers no acoustic isolation and cannot protect parts from dust or accidental contact. Builders who need silent operation or a sealed environment should choose a conventional case instead.

Helstu kostir

  • Open-air design gives unrestricted graphics-card clearance
  • 8 mm SPCC steel frame with baked black sand-grain finish
  • Fits ATX, Micro-ATX and ITX boards up to 305 x 245 mm
  • Accepts standard ATX PSU sized 150 x 86 x 140-250 mm
  • Wide-body layout promotes natural heat dissipation

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

Will the 0.8 mm SPCC steel frame bend under a heavy graphics card during long test sessions?

The 0.8 mm SPCC steel plate with baked black sand grain paint provides a rigid platform; graphics card length and width are not limited by the bench itself, so weight is transferred directly to the motherboard mounting points.

Does the open-air layout keep component temperatures lower than a closed case when the system runs all day?

The wide-body open design removes side-panel airflow restrictions, allowing unrestricted convection around the motherboard, graphics cards and ATX power supply for continuous heat dissipation.

Which ATX power supply dimensions fit the mounting area without modification?

The bench accepts standard ATX units measuring 150 mm × 86 mm with a depth range of 140 mm to 250 mm.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.