暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black sand-grain painted steel open test bench frame for ATX, Micro-ATX and ITX motherboards

TAURKENAM

TAURKENAM Open Chassis Test Bench Case Accessory

SKU CH-APYZ-35VAZ

Open test bench holds ATX, Micro-ATX and ITX boards up to 305×245 mm with standard ATX power supplies and unlimited graphics-card length

  • Open-air design gives unrestricted graphics-card clearance
  • 8 mm SPCC steel frame with baked black sand-grain finish
  • Fits ATX, Micro-ATX and ITX boards up to 305 x 245 mm
  • Accepts standard ATX PSU sized 150 x 86 x 140-250 mm
  • Wide-body layout promotes natural heat dissipation

Open Test Bench for ATX, Micro-ATX and ITX

This open chassis accessory is built from 0.8 mm SPCC steel with a baked black sand-grain finish. It accepts ATX, Micro-ATX and ITX motherboards up to 305 by 245 mm. The design suits builders who need quick component swaps and unobstructed airflow during testing or benchmarking sessions.

Fits Standard ATX Power Supplies

A standard ATX power supply measuring 150 by 86 by 140 to 250 mm mounts directly to the frame. Graphics card length and width are not limited by the bench itself; clearance depends only on the motherboard layout. This arrangement frees internal volume for oversized coolers or custom loop components that would not fit in a closed case.

Sustained Load Relies on Ambient Airflow

With no side panels or forced-air channels, heat dissipation depends entirely on the surrounding environment and the coolers installed on the components. Under prolonged heavy loads the open frame prevents heat soak inside an enclosure, but it offers no acoustic isolation and cannot protect parts from dust or accidental contact. Builders who need silent operation or a sealed environment should choose a conventional case instead.

特長

  • Open-air design gives unrestricted graphics-card clearance
  • 8 mm SPCC steel frame with baked black sand-grain finish
  • Fits ATX, Micro-ATX and ITX boards up to 305 x 245 mm
  • Accepts standard ATX PSU sized 150 x 86 x 140-250 mm
  • Wide-body layout promotes natural heat dissipation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 0.8 mm SPCC steel frame bend under a heavy graphics card during long test sessions?

The 0.8 mm SPCC steel plate with baked black sand grain paint provides a rigid platform; graphics card length and width are not limited by the bench itself, so weight is transferred directly to the motherboard mounting points.

Does the open-air layout keep component temperatures lower than a closed case when the system runs all day?

The wide-body open design removes side-panel airflow restrictions, allowing unrestricted convection around the motherboard, graphics cards and ATX power supply for continuous heat dissipation.

Which ATX power supply dimensions fit the mounting area without modification?

The bench accepts standard ATX units measuring 150 mm × 86 mm with a depth range of 140 mm to 250 mm.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。