Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four black rectangular thermal pads on a plain surface

Thermal Grizzly

Thermal Grizzly Minus Pad Advance 120x20x0.5mm 4-Pack

SKU CH-4HTG-KDYNG

Non-conductive thermal pads sized 120 x 20 mm at 0.5 mm thickness for SSDs, GPUs and other electronics, supplied as a four-pack

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Improved thermal conductivity for SSDs and GPUs
  • Higher compressibility ensures flawless component contact
  • Electrically non-conductive design prevents short circuits
  • 120x20x0.5mm dimensions fit diverse cooling needs
  • Four-pack format covers multiple component installations

Thermal Pad for SSDs and GPUs

The Minus Pad Advance comes as a 4-pack of electrically non-conductive thermal pads sized at 120 x 20 mm with a .5 mm thickness. They are designed to fill gaps between SSDs, GPU coolers, voltage regulators and memory modules. The material provides improved thermal conductivity and higher compressibility than the Basic series for reliable heat transfer in compact builds.

Limits of the pad dimensions

Each pad measures 120 mm by 20 mm so it suits narrow components such as M.2 drives or VRM rows. The fixed .5 mm thickness only bridges small, consistent gaps; larger or uneven spaces need a different thickness. The material is non-conductive but it does not replace thermal paste for direct die contact on a CPU or GPU core.

Check clearance and surface area

Verify that the 120 mm length and 20 mm width cover the target component without overhang. Confirm the .5 mm thickness matches the gap between the chip and the heatsink or backplate. Ensure the mounting pressure can compress the pad enough for full contact without exceeding the board flex limits of your graphics card or motherboard.

Helstu kostir

  • Improved thermal conductivity for SSDs and GPUs
  • Higher compressibility ensures flawless component contact
  • Electrically non-conductive design prevents short circuits
  • 120x20x0.5mm dimensions fit diverse cooling needs
  • Four-pack format covers multiple component installations

Tæknilýsing

BrandThermal Grizzly
ModelTG-MP-A-120-20-05-4
Part NumberTG-MP-A-120-20-05-4
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

Spurningar um þessa vöru

Which thickness should I pick for a 0.5 mm gap?

The pack provides four pads each 0.5 mm thick, matching that exact gap size.

What does the 0.5 mm thickness do once the pad is installed?

It compresses slightly to fill uneven surfaces between the component and heatsink, improving heat transfer.

How does the non-conductive material affect electrical safety?

Being electrically non-conductive, the pad prevents shorts if it touches exposed circuitry on SSDs or GPUs.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.