Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four black rectangular thermal pads on a plain surface

Thermal Grizzly

Thermal Grizzly Minus Pad Advance 120x20x0.5mm 4-Pack

SKU CH-4HTG-KDYNG

Non-conductive thermal pads sized 120 x 20 mm at 0.5 mm thickness for SSDs, GPUs and other electronics, supplied as a four-pack

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Improved thermal conductivity for SSDs and GPUs
  • Higher compressibility ensures flawless component contact
  • Electrically non-conductive design prevents short circuits
  • 120x20x0.5mm dimensions fit diverse cooling needs
  • Four-pack format covers multiple component installations

Thermal Pad for SSDs and GPUs

The Minus Pad Advance comes as a 4-pack of electrically non-conductive thermal pads sized at 120 x 20 mm with a .5 mm thickness. They are designed to fill gaps between SSDs, GPU coolers, voltage regulators and memory modules. The material provides improved thermal conductivity and higher compressibility than the Basic series for reliable heat transfer in compact builds.

Limits of the pad dimensions

Each pad measures 120 mm by 20 mm so it suits narrow components such as M.2 drives or VRM rows. The fixed .5 mm thickness only bridges small, consistent gaps; larger or uneven spaces need a different thickness. The material is non-conductive but it does not replace thermal paste for direct die contact on a CPU or GPU core.

Check clearance and surface area

Verify that the 120 mm length and 20 mm width cover the target component without overhang. Confirm the .5 mm thickness matches the gap between the chip and the heatsink or backplate. Ensure the mounting pressure can compress the pad enough for full contact without exceeding the board flex limits of your graphics card or motherboard.

Kohokohdat

  • Improved thermal conductivity for SSDs and GPUs
  • Higher compressibility ensures flawless component contact
  • Electrically non-conductive design prevents short circuits
  • 120x20x0.5mm dimensions fit diverse cooling needs
  • Four-pack format covers multiple component installations

Tekniset tiedot

BrandThermal Grizzly
ModelTG-MP-A-120-20-05-4
Part NumberTG-MP-A-120-20-05-4
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

Kysymyksiä tästä tuotteesta

Which thickness should I pick for a 0.5 mm gap?

The pack provides four pads each 0.5 mm thick, matching that exact gap size.

What does the 0.5 mm thickness do once the pad is installed?

It compresses slightly to fill uneven surfaces between the component and heatsink, improving heat transfer.

How does the non-conductive material affect electrical safety?

Being electrically non-conductive, the pad prevents shorts if it touches exposed circuitry on SSDs or GPUs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.