Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two rectangular thermal pads, 120 by 100 millimetres, 3.0 millimetres thick, soft grey finish

Thermal Grizzly

Thermal Grizzly Minus Pad High Compression 120x100x3.0mm 2-Pack thermal pad

SKU CH-S8K7-8MNZJ

High-compression thermal pad kit with two 120x100x3.0mm sheets that maintain conductivity under pressure for GPU and SSD cooling

  • FeaturesThe thermal pads of the Minus Pad High Compression series of
  • Excellent thermal conductivity maintained under heavy compression
  • Very high compressibility bridges varying height differences simultaneously
  • Electrically non-conductive design ensures safe application on sensitive components
  • Versatile pad suits VRAM, voltage regulators and other contact surfaces
  • Easy handling simplifies installation on GPUs and SSDs

High-compression thermal pads 120x100mm

Thermal Grizzly Minus Pad High Compression pads measure 120 by 100 millimetres and are 3.0 millimetres thick. The two-pack delivers very high compressibility so a single pad can bridge varying height differences on a graphics card or SSD. They are electrically non-conductive and maintain or improve thermal conductivity under heavy pressure.

Suits GPU water-cooling conversions

Builders converting a graphics card to a water block or replacing cooler pads on VRAM and voltage regulators benefit from the pad's tolerance to height differences. Users who need a specific thin profile or a pre-cut shape for a particular laptop should look at something else.

3.0 mm thickness defines compression range

The 3.0 millimetre starting thickness determines how much the pad can compress while keeping contact across uneven surfaces. Choose this spec when the exact gap is unknown and a thicker, highly compressible pad is required.

Helstu kostir

  • Excellent thermal conductivity maintained under heavy compression
  • Very high compressibility bridges varying height differences simultaneously
  • Electrically non-conductive design ensures safe application on sensitive components
  • Versatile pad suits VRAM, voltage regulators and other contact surfaces
  • Easy handling simplifies installation on GPUs and SSDs

Tæknilýsing

BrandThermal Grizzly
ModelTG-MP-HC-120-100-30-2
Part NumberTG-MP-HC-120-100-30-2
FeaturesThe thermal pads of the Minus Pad High Compression series offer extremely high compressibility combined with excellent thermal conductivity. They are especially practical when converting a graphics card to a water cooler, as a single pad thickness can be used across various contact points.

Spurningar um þessa vöru

What component spacing can the 3.0 mm Minus Pad High Compression accommodate when converting a graphics card to a water cooler?

The 3.0 mm pad compresses heavily, so a single pad can bridge different height gaps across VRAM, voltage regulators and the GPU die at the same time.

Will the pad remain electrically safe if it contacts exposed PCB traces on an older graphics card?

Yes, the material is electrically non-conductive, so it will not cause shorts even when pressed against bare circuitry on legacy boards.

How can I verify the pad is performing correctly after installing it on my GPU?

Monitor VRAM and VRM temperatures under load; they should stay lower and more even than with the original pads, confirming good contact and conductivity.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.