Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR3 desktop memory sticks with 240 pins

Timetec

Timetec 16GB (2x8GB) DDR3 1333MHz PC3-10600 CL9 240-pin UDIMM desktop RAM

SKU CH-E1NS-ZZKW2

A 16 GB dual-channel kit of DDR3 1333 desktop memory running at 1.5 V with CL9 latency on 240-pin UDIMMs

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ColorGreen PCB

Capacity 16GB (2 x 8GB)

Speed DDR3 1333

Color Green PCB

  • 16 GB kit (2 × 8 GB) for higher multitasking headroom
  • DDR3 1333 MHz PC3-10600 speed rating for responsive desktop performance
  • CL9 latency at 1.5 V JEDEC voltage for stable operation
  • Dual-rank 2Rx8 512×8 organisation for efficient data throughput
  • 240-pin non-ECC unbuffered UDIMM fits standard desktop slots

16 GB DDR3 1333 MHz kit for desktop upgrades

This Timetec kit provides 16 GB of DDR3 memory in two 8 GB modules. It runs at 1333 MHz with a PC3-10600 rating and CL9 latency. The modules are non-ECC unbuffered UDIMMs operating at the standard 1.5 V. They use a 240-pin interface and green PCBs, designed for desktop motherboards that support DDR3.

Not for laptop owners or systems needing ECC

This memory fits desktop PCs using DDR3 slots and works with compatible Intel and AMD platforms. It will not work in laptops, which require SO-DIMM modules. Builders who need error-correcting code memory for servers or workstations should look elsewhere, as these modules are non-ECC. Systems limited to lower voltages than 1.5 V or requiring single-rank modules are also unsuitable.

Dual-rank 2Rx8 organisation with 512x8 chip density

Each 8 GB module uses a dual-rank 2Rx8 layout based on 512x8 ICs. This organisation affects compatibility with some older chipsets that only accept single-rank modules. Checking the motherboard manual for dual-rank support is the single specification that decides whether this kit will function correctly.

Helstu kostir

  • 16 GB kit (2 × 8 GB) for higher multitasking headroom
  • DDR3 1333 MHz PC3-10600 speed rating for responsive desktop performance
  • CL9 latency at 1.5 V JEDEC voltage for stable operation
  • Dual-rank 2Rx8 512×8 organisation for efficient data throughput
  • 240-pin non-ECC unbuffered UDIMM fits standard desktop slots

Tæknilýsing

Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
ColorGreen PCB

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much heat or power draw should I expect from the 1.5 V DDR3 kit running continuously?

The modules operate at the JEDEC-standard 1.5 V, so heat and power draw are typical for standard-voltage DDR3 and stay within normal desktop limits during all-day use.

What motherboard slot and chipset do I need already to install these 240-pin UDIMMs?

You need a desktop motherboard with DDR3 240-pin DIMM slots and a CPU or chipset that supports DDR3 1333 MHz memory.

Will the CL9 1333 MHz sticks run stably alongside older DDR3 modules I keep in the other slots?

The kit runs at 1333 MHz with CL9 timing; the system will clock all installed DDR3 to the slowest module's speed and loosest timings, so older sticks will work but at the common lowest setting.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.