저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Timetec

Timetec 16GB (2x8GB) DDR3 1333MHz PC3-10600 CL9 240-pin UDIMM desktop RAM

SKU CH-E1NS-ZZKW2

A 16 GB dual-channel kit of DDR3 1333 desktop memory running at 1.5 V with CL9 latency on 240-pin UDIMMs

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ColorGreen PCB

Capacity 16GB (2 x 8GB)

Speed DDR3 1333

Color Green PCB

  • 16 GB kit (2 × 8 GB) for higher multitasking headroom
  • DDR3 1333 MHz PC3-10600 speed rating for responsive desktop performance
  • CL9 latency at 1.5 V JEDEC voltage for stable operation
  • Dual-rank 2Rx8 512×8 organisation for efficient data throughput
  • 240-pin non-ECC unbuffered UDIMM fits standard desktop slots

16 GB DDR3 1333 MHz kit for desktop upgrades

This Timetec kit provides 16 GB of DDR3 memory in two 8 GB modules. It runs at 1333 MHz with a PC3-10600 rating and CL9 latency. The modules are non-ECC unbuffered UDIMMs operating at the standard 1.5 V. They use a 240-pin interface and green PCBs, designed for desktop motherboards that support DDR3.

Not for laptop owners or systems needing ECC

This memory fits desktop PCs using DDR3 slots and works with compatible Intel and AMD platforms. It will not work in laptops, which require SO-DIMM modules. Builders who need error-correcting code memory for servers or workstations should look elsewhere, as these modules are non-ECC. Systems limited to lower voltages than 1.5 V or requiring single-rank modules are also unsuitable.

Dual-rank 2Rx8 organisation with 512x8 chip density

Each 8 GB module uses a dual-rank 2Rx8 layout based on 512x8 ICs. This organisation affects compatibility with some older chipsets that only accept single-rank modules. Checking the motherboard manual for dual-rank support is the single specification that decides whether this kit will function correctly.

주요 특징

  • 16 GB kit (2 × 8 GB) for higher multitasking headroom
  • DDR3 1333 MHz PC3-10600 speed rating for responsive desktop performance
  • CL9 latency at 1.5 V JEDEC voltage for stable operation
  • Dual-rank 2Rx8 512×8 organisation for efficient data throughput
  • 240-pin non-ECC unbuffered UDIMM fits standard desktop slots

사양

Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
ColorGreen PCB

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How much heat or power draw should I expect from the 1.5 V DDR3 kit running continuously?

The modules operate at the JEDEC-standard 1.5 V, so heat and power draw are typical for standard-voltage DDR3 and stay within normal desktop limits during all-day use.

What motherboard slot and chipset do I need already to install these 240-pin UDIMMs?

You need a desktop motherboard with DDR3 240-pin DIMM slots and a CPU or chipset that supports DDR3 1333 MHz memory.

Will the CL9 1333 MHz sticks run stably alongside older DDR3 modules I keep in the other slots?

The kit runs at 1333 MHz with CL9 timing; the system will clock all installed DDR3 to the slowest module's speed and loosest timings, so older sticks will work but at the common lowest setting.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.