Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR3 memory modules with 240 pins

Timetec

Timetec 32GB 4x8GB DDR3 1600 CL11 1.5V 240-pin Green PCB

SKU CH-J45G-SCHBS

A 32 GB desktop memory kit of four 8 GB DDR3 modules running at 1600 MHz with CL11 timing and 1.5 V on green 240-pin PCBs

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • ColorGreen PCB

Capacity 32GB (4 x 8GB)

Speed DDR3 1600

Color Green PCB

  • 32 GB total capacity across four 8 GB modules
  • DDR3 1600 speed rated at PC3 12800 bandwidth
  • Low 1.5 V JEDEC voltage reduces power draw
  • CL11 latency timing for responsive operation
  • 240 pin UDIMM form factor fits standard desktop slots

Kit composition

This Timetec kit contains four 8 GB modules for a total of 32 GB of DDR3 desktop memory. The modules run at 1600 MHz with a CAS latency of 11 and operate at the standard 1.5 V. Each stick is a 240-pin UDIMM built with dual-rank 512x8 ICs on a green PCB.

Who this suits

The kit is designed for desktop PCs that use DDR3 unbuffered non-ECC memory and can accept four modules. It is not for laptops, which require SODIMM form factors. It is also not for systems that only support registered or ECC memory, or for platforms limited to two memory slots.

Deciding specification

The 1600 MHz DDR3 speed with CL11 timing at 1.5 V is the key specification to match against your motherboard’s supported memory list. If your board requires a different DDR generation, voltage or form factor, these modules will not be compatible.

Helstu kostir

  • 32 GB total capacity across four 8 GB modules
  • DDR3 1600 speed rated at PC3 12800 bandwidth
  • Low 1.5 V JEDEC voltage reduces power draw
  • CL11 latency timing for responsive operation
  • 240 pin UDIMM form factor fits standard desktop slots

Tæknilýsing

Capacity32GB (4 x 8GB)
SpeedDDR3 1600 (PC3 12800)
ColorGreen PCB

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Should I choose the 4×8 GB kit or a different capacity?

This kit provides 32 GB total across four 8 GB modules, filling four DIMM slots on a desktop board that supports DDR3.

What does the 1600 MHz rating deliver in a real system?

The modules run at DDR3-1600 with CL11 latency at 1.5 V, giving a peak transfer rate of PC3-12800 when the motherboard enables the rated speed.

How does the 240-pin DDR3 interface limit performance?

The 240-pin unbuffered non-ECC DDR3 connection caps bandwidth at the PC3-12800 level and does not support newer DDR generations.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.