Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green DDR3 memory modules with 240 pins

Timetec

Timetec 32GB 4x8GB DDR3 1600 CL11 1.5V 240-pin Green PCB

SKU CH-J45G-SCHBS

A 32 GB desktop memory kit of four 8 GB DDR3 modules running at 1600 MHz with CL11 timing and 1.5 V on green 240-pin PCBs

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • ColorGreen PCB

Capacity 32GB (4 x 8GB)

Speed DDR3 1600

Color Green PCB

  • 32 GB total capacity across four 8 GB modules
  • DDR3 1600 speed rated at PC3 12800 bandwidth
  • Low 1.5 V JEDEC voltage reduces power draw
  • CL11 latency timing for responsive operation
  • 240 pin UDIMM form factor fits standard desktop slots

Kit composition

This Timetec kit contains four 8 GB modules for a total of 32 GB of DDR3 desktop memory. The modules run at 1600 MHz with a CAS latency of 11 and operate at the standard 1.5 V. Each stick is a 240-pin UDIMM built with dual-rank 512x8 ICs on a green PCB.

Who this suits

The kit is designed for desktop PCs that use DDR3 unbuffered non-ECC memory and can accept four modules. It is not for laptops, which require SODIMM form factors. It is also not for systems that only support registered or ECC memory, or for platforms limited to two memory slots.

Deciding specification

The 1600 MHz DDR3 speed with CL11 timing at 1.5 V is the key specification to match against your motherboard’s supported memory list. If your board requires a different DDR generation, voltage or form factor, these modules will not be compatible.

Puncte forte

  • 32 GB total capacity across four 8 GB modules
  • DDR3 1600 speed rated at PC3 12800 bandwidth
  • Low 1.5 V JEDEC voltage reduces power draw
  • CL11 latency timing for responsive operation
  • 240 pin UDIMM form factor fits standard desktop slots

Specificații

Capacity32GB (4 x 8GB)
SpeedDDR3 1600 (PC3 12800)
ColorGreen PCB

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Should I choose the 4×8 GB kit or a different capacity?

This kit provides 32 GB total across four 8 GB modules, filling four DIMM slots on a desktop board that supports DDR3.

What does the 1600 MHz rating deliver in a real system?

The modules run at DDR3-1600 with CL11 latency at 1.5 V, giving a peak transfer rate of PC3-12800 when the motherboard enables the rated speed.

How does the 240-pin DDR3 interface limit performance?

The 240-pin unbuffered non-ECC DDR3 connection caps bandwidth at the PC3-12800 level and does not support newer DDR generations.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.