Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four black DDR3 desktop memory modules side by side

Timetec

Timetec 32GB Kit (4x8GB) DDR3/DDR3L 1333MHz Desktop RAM

SKU CH-9VS2-01VHH

A 32 GB desktop memory kit of four 8 GB DDR3/DDR3L modules running at 1333 MHz with CL9 latency and dual-voltage 1.35 V or 1.5 V operation

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ColorBlack PCB

Capacity 32GB (4 x 8GB)

Speed DDR3 1333

Color Black PCB

  • 32 GB total capacity from four 8 GB modules
  • Dual-voltage operation at 1.35 V or 1.5 V for wider DDR3/DDR3L compatibility
  • CL9 latency at 1333 MHz for responsive multitasking
  • 240-pin UDIMM form factor fits standard desktop DIMM slots
  • Rigorously tested ICs deliver stable performance under load

Kit Composition

This Timetec kit supplies 32 GB of desktop memory in four 8 GB modules. It uses DDR3 and DDR3L dual-voltage parts rated at 1333 MHz PC3-10600 with CL9 latency. Each stick is a 240-pin non-ECC unbuffered UDIMM built with 2Rx8 dual-rank chips. The PCB colour may be black or green depending on the production batch.

Suitability

The pack suits owners of DDR3 desktop boards that accept 1.35 V or 1.5 V unbuffered DIMMs and have four free slots for a full 32 GB upgrade. Builders working with laptops, systems limited to two slots, or platforms requiring ECC or registered memory cannot use this kit. Buyers needing higher frequencies or lower latencies should look at other modules.

Deciding Specification

The dual-voltage 1.35 V / 1.5 V rating is the single figure that decides compatibility. A motherboard must support one of these JEDEC voltages for the modules to operate correctly. If the board only accepts a different voltage the kit will not work.

Puncte forte

  • 32 GB total capacity from four 8 GB modules
  • Dual-voltage operation at 1.35 V or 1.5 V for wider DDR3/DDR3L compatibility
  • CL9 latency at 1333 MHz for responsive multitasking
  • 240-pin UDIMM form factor fits standard desktop DIMM slots
  • Rigorously tested ICs deliver stable performance under load

Specificații

Capacity32GB (4 x 8GB)
SpeedDDR3 1333 (PC3 10600)
ColorBlack PCB

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does my motherboard need four free 240-pin DDR3 slots to use all four 8 GB modules?

Yes, the kit contains four 240-pin UDIMMs so you need four available DDR3 desktop slots.

If I keep my existing 1333 MHz DDR3 sticks, will this kit run at the same speed?

The modules are rated for 1333 MHz CL9 at 1.5 V or 1.35 V; the system will run all sticks at the lowest common speed and timings.

How can I verify the kit is running at 1333 MHz with CL9 timings after installation?

Enter the BIOS or use a tool like CPU-Z and check that the DRAM frequency shows 1333 MT/s and CAS latency reads 9.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.