Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Square grey silicone thermal pad 100 by 100 by .5 mm weighing 23 grams

UPSIREN

UPSIREN 16W Thermal Pad 16W/mK 100x100x.5mm 23g

SKU CH-D6CW-A1668

A 100x100mm silicone thermal pad with 16W/mK conductivity, 0.5mm thickness and 23g weight for CPU, GPU and laptop heatsinks

  • Volume / Net Weight23g
  • Thermal Conductivity16W/mk
  • Long Term Operating Temperature-40 to 200 C
  • FeaturesNon-Corrosive, Non-Curing & Non-Toxi

Option 100 x 100 x 0.5 mm

  • High 16 W/mK conductivity moves heat fast
  • Soft 30-degree pad conforms tightly to chips
  • Non-conductive silicone keeps circuits safe
  • Reusable design allows easy rework
  • Wide -40 to 200 °C range handles extremes

Purpose and fit

This UPSIREN OEM thermal pad delivers 16W/mK conductivity in a 100x100x.5mm sheet weighing 23g. It targets builders and technicians who need a non-conductive, reusable interface for laptop heatsinks, GPU or CPU coolers, and LED modules where electrical insulation is mandatory.

Capacity and headroom

The pad operates continuously from -40 to 200 C without melting or curing, so it handles sustained high-temperature loads in industrial, automotive and consumer electronics. Its 30-degree shore hardness lets it compress to fill uneven gaps, but the fixed .5mm thickness and single 100x100mm size limit use to applications that match those exact dimensions.

Build and daily use

Silicone construction stays soft, non-corrosive and non-toxic over time, and the natural viscosity allows easy placement and rework without residue. Because the material is electrically insulating and anti-static, it protects sensitive circuitry during assembly, yet the pad cannot be cut or resized from the supplied sheet, so users must plan layouts around the single 100x100mm piece.

Helstu kostir

  • High 16 W/mK conductivity moves heat fast
  • Soft 30-degree pad conforms tightly to chips
  • Non-conductive silicone keeps circuits safe
  • Reusable design allows easy rework
  • Wide -40 to 200 °C range handles extremes

Tæknilýsing

BrandUPSIREN
SeriesOEM
Model16W
Volume / Net Weight23g
Thermal Conductivity16W/mk
Long Term Operating Temperature-40 to 200 C
FeaturesNon-Corrosive, Non-Curing & Non-Toxi

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 16 W/mK pad work on an older GPU heatsink that originally used a thinner pad?

The pad is .5 mm thick and soft at 30 degrees hardness, so it compresses to fill gaps on legacy heatsinks while delivering 16 W/mK conductivity.

How can I confirm the pad is performing correctly once installed?

Monitor component temperatures under load; they should stay within the -40 to 200 °C operating range and show reduced thermal throttling compared to the previous interface material.

Does the package include more than the single 100x100 mm pad, or do I need to buy cutting tools separately?

One 23 g pad measuring 100x100x.5 mm is supplied; any additional pads or cutting tools must be purchased separately.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.