Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Square grey silicone thermal pad 100 by 100 by .5 mm weighing 23 grams

UPSIREN

UPSIREN 16W Thermal Pad 16W/mK 100x100x.5mm 23g

SKU CH-D6CW-A1668

A 100x100mm silicone thermal pad with 16W/mK conductivity, 0.5mm thickness and 23g weight for CPU, GPU and laptop heatsinks

  • Volume / Net Weight23g
  • Thermal Conductivity16W/mk
  • Long Term Operating Temperature-40 to 200 C
  • FeaturesNon-Corrosive, Non-Curing & Non-Toxi

Option 100 x 100 x 0.5 mm

  • High 16 W/mK conductivity moves heat fast
  • Soft 30-degree pad conforms tightly to chips
  • Non-conductive silicone keeps circuits safe
  • Reusable design allows easy rework
  • Wide -40 to 200 °C range handles extremes

Purpose and fit

This UPSIREN OEM thermal pad delivers 16W/mK conductivity in a 100x100x.5mm sheet weighing 23g. It targets builders and technicians who need a non-conductive, reusable interface for laptop heatsinks, GPU or CPU coolers, and LED modules where electrical insulation is mandatory.

Capacity and headroom

The pad operates continuously from -40 to 200 C without melting or curing, so it handles sustained high-temperature loads in industrial, automotive and consumer electronics. Its 30-degree shore hardness lets it compress to fill uneven gaps, but the fixed .5mm thickness and single 100x100mm size limit use to applications that match those exact dimensions.

Build and daily use

Silicone construction stays soft, non-corrosive and non-toxic over time, and the natural viscosity allows easy placement and rework without residue. Because the material is electrically insulating and anti-static, it protects sensitive circuitry during assembly, yet the pad cannot be cut or resized from the supplied sheet, so users must plan layouts around the single 100x100mm piece.

Kohokohdat

  • High 16 W/mK conductivity moves heat fast
  • Soft 30-degree pad conforms tightly to chips
  • Non-conductive silicone keeps circuits safe
  • Reusable design allows easy rework
  • Wide -40 to 200 °C range handles extremes

Tekniset tiedot

BrandUPSIREN
SeriesOEM
Model16W
Volume / Net Weight23g
Thermal Conductivity16W/mk
Long Term Operating Temperature-40 to 200 C
FeaturesNon-Corrosive, Non-Curing & Non-Toxi

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 16 W/mK pad work on an older GPU heatsink that originally used a thinner pad?

The pad is .5 mm thick and soft at 30 degrees hardness, so it compresses to fill gaps on legacy heatsinks while delivering 16 W/mK conductivity.

How can I confirm the pad is performing correctly once installed?

Monitor component temperatures under load; they should stay within the -40 to 200 °C operating range and show reduced thermal throttling compared to the previous interface material.

Does the package include more than the single 100x100 mm pad, or do I need to buy cutting tools separately?

One 23 g pad measuring 100x100x.5 mm is supplied; any additional pads or cutting tools must be purchased separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.