XPG
XPG GAMMIX S60 Blade AGAMMIXS60-2T-CS internal SSD
- Consumer
- M.2 2280
73,99 USD
0.00095122BTC
Til á lager
XPG
XPG GAMMIX S60 Blade AGAMMIXS60-1T-CS 1TB internal SSD
M.2 2280 1TB NVMe drive with PCIe Gen4 x4 interface and read speeds up to 5000MB/s on PC or 4600MB/s on PS5
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D NAND
- InterfacePCIe Gen4 x4
- ProtocolNVMe 1.4
Options 1TB
- 2TB
- 1TB
- Up to 5,000 MB/s read on PC with PCIe Gen4 x4
- Sustained 4,200 MB/s write for large file transfers
- 4,600 MB/s read on PS5 for faster game loads
- 5 million hour MTBF and 1500G shock resistance for durability
- Operates 0 °C to 70 °C and stores at -40 °C to 85 °C
Capacity and form factor
The XPG GAMMIX S60 Blade is an M.2 2280 internal SSD with a 1TB capacity. It uses 3D NAND components and connects through a PCIe Gen4 x4 interface. The drive follows the NVMe 1.4 protocol for consumer workloads.
Compatibility and use cases
This drive works with PS5 consoles and with PC or laptop platforms that provide an M.2 slot wired for PCIe Gen4. Sequential read reaches up to 4,600MB/s on PS5 and up to 5,000MB/s on PC, while write speeds reach up to 4,200MB/s. Systems limited to older PCIe generations will not achieve the rated throughput.
Deciding specification
The PCIe Gen4 x4 interface combined with NVMe 1.4 support determines whether this SSD can deliver its rated 5,000MB/s read and 4,200MB/s write performance. Verify that the host platform provides a Gen4 M.2 slot before purchase.
Helstu kostir
- Up to 5,000 MB/s read on PC with PCIe Gen4 x4
- Sustained 4,200 MB/s write for large file transfers
- 4,600 MB/s read on PS5 for faster game loads
- 5 million hour MTBF and 1500G shock resistance for durability
- Operates 0 °C to 70 °C and stores at -40 °C to 85 °C
Tæknilýsing
| Brand | XPG |
|---|---|
| Series | GAMMIX S60 Blade |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCIe Gen4 x4 |
| Protocol | NVMe 1.4 |
| Max Sequential Read | Read speed up to 4,600MB/s (PS5) |
| Max Sequential Write | Up to 4200 MBps |
| MTBF | 1,500,000 hours |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Sendingarþyngd | 0.02 kg |
| Stærð sendingar | 128 × 102 × 16 mm |
Aðrar útgáfur af þessari vöru
1 í viðbót í sama vöruflokki
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
Spurningar um þessa vöru
Does my motherboard need an M.2 2280 slot with PCIe Gen4 x4 support to use this drive?
Yes, the drive requires an M.2 2280 slot that provides a PCIe Gen4 x4 electrical connection for full NVMe 1.4 operation.
Will this SSD still operate if I install it in a system that only has PCIe Gen3 M.2 slots?
The drive is backward compatible and will function at PCIe Gen3 speeds, though sequential read and write rates will be limited to the Gen3 ceiling.
How can I confirm the SSD is delivering its rated sequential read speed of up to 4600 MB/s on a PS5?
Run the PS5 built-in storage speed test after installation; a result approaching 4600 MB/s indicates the drive is performing as intended.
Einnig í þessum vöruflokki
Fólk bar þetta saman
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
