Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Thin green circuit board with black controller and silver label, M.2 2280 form factor

XPG

XPG GAMMIX S60 Blade AGAMMIXS60-1T-CS 1TB internal SSD

SKU CH-936Y-NPY4X MPN AGAMMIXS60-1T-CS

M.2 2280 1TB NVMe drive with PCIe Gen4 x4 interface and read speeds up to 5000MB/s on PC or 4600MB/s on PS5

  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D NAND
  • InterfacePCIe Gen4 x4
  • ProtocolNVMe 1.4

Options 1TB

  • Up to 5,000 MB/s read on PC with PCIe Gen4 x4
  • Sustained 4,200 MB/s write for large file transfers
  • 4,600 MB/s read on PS5 for faster game loads
  • 5 million hour MTBF and 1500G shock resistance for durability
  • Operates 0 °C to 70 °C and stores at -40 °C to 85 °C

Capacity and form factor

The XPG GAMMIX S60 Blade is an M.2 2280 internal SSD with a 1TB capacity. It uses 3D NAND components and connects through a PCIe Gen4 x4 interface. The drive follows the NVMe 1.4 protocol for consumer workloads.

Compatibility and use cases

This drive works with PS5 consoles and with PC or laptop platforms that provide an M.2 slot wired for PCIe Gen4. Sequential read reaches up to 4,600MB/s on PS5 and up to 5,000MB/s on PC, while write speeds reach up to 4,200MB/s. Systems limited to older PCIe generations will not achieve the rated throughput.

Deciding specification

The PCIe Gen4 x4 interface combined with NVMe 1.4 support determines whether this SSD can deliver its rated 5,000MB/s read and 4,200MB/s write performance. Verify that the host platform provides a Gen4 M.2 slot before purchase.

Pluspunten

  • Up to 5,000 MB/s read on PC with PCIe Gen4 x4
  • Sustained 4,200 MB/s write for large file transfers
  • 4,600 MB/s read on PS5 for faster game loads
  • 5 million hour MTBF and 1500G shock resistance for durability
  • Operates 0 °C to 70 °C and stores at -40 °C to 85 °C

Specificaties

BrandXPG
SeriesGAMMIX S60 Blade
Used ForConsumer
Form FactorM.2 2280
Capacity1TB
Memory Components3D NAND
InterfacePCIe Gen4 x4
ProtocolNVMe 1.4
Max Sequential ReadRead speed up to 4,600MB/s (PS5)
Max Sequential WriteUp to 4200 MBps
MTBF1,500,000 hours
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Max Shock Resistance1500G
Verzendgewicht0.02 kg
Pakketafmetingen128 × 102 × 16 mm

Andere versies van dit model

Nog 1 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does my motherboard need an M.2 2280 slot with PCIe Gen4 x4 support to use this drive?

Yes, the drive requires an M.2 2280 slot that provides a PCIe Gen4 x4 electrical connection for full NVMe 1.4 operation.

Will this SSD still operate if I install it in a system that only has PCIe Gen3 M.2 slots?

The drive is backward compatible and will function at PCIe Gen3 speeds, though sequential read and write rates will be limited to the Gen3 ceiling.

How can I confirm the SSD is delivering its rated sequential read speed of up to 4600 MB/s on a PS5?

Run the PS5 built-in storage speed test after installation; a result approaching 4600 MB/s indicates the drive is performing as intended.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.