Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 92x38mm case fan with 4-pin connector and dual ball bearing

Zyvpee

Zyvpee 9238 48V .7A 4 Pin 2 Ball 92x38mm Case Fan

SKU CH-G18K-GW67W

A 48 V, 0.7 A dual-ball-bearing case fan measuring 92 × 38 mm with a 4-pin connector for server inverter cooling

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesPower Cooling
  • 48 V operation suits server and inverter builds
  • Dual ball bearing extends service life under continuous load
  • 92 × 38 mm frame fits standard 9238 mounting holes
  • Four-pin connector enables PWM speed control
  • 7 A draw delivers strong airflow with modest power

92 mm 48 V server fan

The Zyvpee 9238 is a 92 mm by 38 mm case fan rated for 48 V DC at 0.7 A. It uses a dual-ball bearing and a four-pin power connector for speed control and monitoring. The black frame carries no lighting.

Suits 48 V inverter or server builds.

This fan suits integrators working with 48 V inverter power supplies or server-grade cooling loops that demand high-voltage operation. Builders whose systems only provide the common lower-voltage fan headers cannot use this unit directly. Buyers needing LED illumination or a different voltage should look elsewhere.

48 V 0.7 A electrical rating

The defining specification is the 48 V 0.7 A power requirement delivered through the four-pin connector. Match this voltage and current to your power source before purchase; a mismatch will prevent the fan from operating or risk damage.

Helstu kostir

  • 48 V operation suits server and inverter builds
  • Dual ball bearing extends service life under continuous load
  • 92 × 38 mm frame fits standard 9238 mounting holes
  • Four-pin connector enables PWM speed control
  • 7 A draw delivers strong airflow with modest power

Tæknilýsing

Brand3ccooler.com
Series2B09238B48U P037
Model2B09238B48U
TypeCase Fan
Bearing Type2 Ball
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesPower Cooling
Dimensions92*38mm

Spurningar um þessa vöru

Will the 92 mm by 38 mm frame with four-pin connector fit my 48 V server chassis?

The fan measures 92 mm square by 38 mm thick and uses a standard four-pin power connector, so it fits any 9238 mounting pattern wired for 48 V DC.

Which orientation and pin-out should I follow when wiring the 4-wire lead?

Align the keyed four-pin plug so the yellow sense wire sits toward the outer edge of the header; reversing the plug will prevent the tachometer signal from reaching the motherboard.

How often should the dual-ball bearing assembly be inspected or swapped in continuous inverter use?

Inspect the dual-ball bearing assembly annually for noise or vibration; replace the unit if bearing rumble appears during 48 V operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.