Zyvpee
Zyvpee 9238 48V .7A 4 Pin 2 Ball 92x38mm Case Fan
A 48 V, 0.7 A dual-ball-bearing case fan measuring 92 × 38 mm with a 4-pin connector for server inverter cooling
- TypeCase Fan
- Bearing Type2 Ball
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- FeaturesPower Cooling
- 48 V operation suits server and inverter builds
- Dual ball bearing extends service life under continuous load
- 92 × 38 mm frame fits standard 9238 mounting holes
- Four-pin connector enables PWM speed control
- 7 A draw delivers strong airflow with modest power
92 mm 48 V server fan
The Zyvpee 9238 is a 92 mm by 38 mm case fan rated for 48 V DC at 0.7 A. It uses a dual-ball bearing and a four-pin power connector for speed control and monitoring. The black frame carries no lighting.
Suits 48 V inverter or server builds.
This fan suits integrators working with 48 V inverter power supplies or server-grade cooling loops that demand high-voltage operation. Builders whose systems only provide the common lower-voltage fan headers cannot use this unit directly. Buyers needing LED illumination or a different voltage should look elsewhere.
48 V 0.7 A electrical rating
The defining specification is the 48 V 0.7 A power requirement delivered through the four-pin connector. Match this voltage and current to your power source before purchase; a mismatch will prevent the fan from operating or risk damage.
Puntos fuertes
- 48 V operation suits server and inverter builds
- Dual ball bearing extends service life under continuous load
- 92 × 38 mm frame fits standard 9238 mounting holes
- Four-pin connector enables PWM speed control
- 7 A draw delivers strong airflow with modest power
Especificaciones
| Brand | 3ccooler.com |
|---|---|
| Series | 2B09238B48U P037 |
| Model | 2B09238B48U |
| Type | Case Fan |
| Bearing Type | 2 Ball |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Features | Power Cooling |
| Dimensions | 92*38mm |
Preguntas sobre este artículo
Will the 92 mm by 38 mm frame with four-pin connector fit my 48 V server chassis?
The fan measures 92 mm square by 38 mm thick and uses a standard four-pin power connector, so it fits any 9238 mounting pattern wired for 48 V DC.
Which orientation and pin-out should I follow when wiring the 4-wire lead?
Align the keyed four-pin plug so the yellow sense wire sits toward the outer edge of the header; reversing the plug will prevent the tachometer signal from reaching the motherboard.
How often should the dual-ball bearing assembly be inspected or swapped in continuous inverter use?
Inspect the dual-ball bearing assembly annually for noise or vibration; replace the unit if bearing rumble appears during 48 V operation.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.0000105BTC
En stock