Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black turbine blower fan with 4-pin PWM connector

Zyvpee

Zyvpee BASC0712R2M 12V .3A 4-pin PWM turbine blower case fan

SKU CH-SNCS-F1H1T

A 12 V PWM turbine blower with hydraulic bearing runs at 2500-2999 RPM and 25-30 dBA for CPU cooler airflow

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeHydraulic
  • RPM2500-2999 RPM
  • Noise Level25 - 30 dBA
  • Power Connector4 Pin
  • PWM control adjusts speed precisely between 2500-2999 RPM
  • Turbine blower design directs focused airflow onto CPU cooler
  • Hydraulic bearing reduces friction for quieter 25-30 dBA operation
  • 12V .3A draw keeps power consumption low
  • 4-pin connector enables automatic motherboard fan management

Zyvpee 12 V .3 A PWM blower fan

The Zyvpee BASC0712R2M is a 12 V turbine-style blower that draws 0.3 A through a 4-pin PWM connector. It targets builders who need focused airflow through a heatsink or tight chassis channel rather than broad case circulation.

Hydraulic bearing eases mounting

The hydraulic bearing reduces friction during spin-up so the fan seats smoothly in standard 4-pin headers. PWM control prevents the motor from hunting at low duty cycles, a common issue with simpler voltage-regulated blowers.

2500–2999 RPM at 25–30 dBA

At full speed the impeller moves enough air for a compact CPU cooler or single-slot GPU heatsink. The acoustic ceiling stays below 30 dBA, so it suits quiet workstations but cannot feed a high-TDP tower cooler or multi-GPU array.

Helstu kostir

  • PWM control adjusts speed precisely between 2500-2999 RPM
  • Turbine blower design directs focused airflow onto CPU cooler
  • Hydraulic bearing reduces friction for quieter 25-30 dBA operation
  • 12V .3A draw keeps power consumption low
  • 4-pin connector enables automatic motherboard fan management

Tæknilýsing

SeriesBASC0712R2M
ModelBASC0712R2M
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeHydraulic
RPM2500-2999 RPM
Noise Level25 - 30 dBA
Power Connector4 Pin
ColorBlack
LEDNon-LED

Spurningar um þessa vöru

How can I verify the fan is running at the correct 2500-2999 RPM range after connecting the 4-pin PWM connector?

Connect the 4-pin PWM header to the motherboard, then monitor the reported speed in BIOS or fan-control software; it should read between 2500 and 2999 RPM under load.

Does the package include mounting screws or a power adapter, or must I supply them myself?

The fan ships with the turbine blower unit only; standard case-fan screws and any required 4-pin extension cables are not included and must be purchased separately.

Should I choose this 12 V 0.3 A hydraulic-bearing model or a different version for a CPU cooler that specifies 25-30 dBA noise?

This BASC0712R2M is rated at 12 V, 0.3 A with a hydraulic bearing and 25-30 dBA output, matching coolers that call for those exact electrical and acoustic specifications.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.