Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black turbine blower fan with 4-pin PWM connector

Zyvpee

Zyvpee BASC0712R2M 12V .3A 4-pin PWM turbine blower case fan

SKU CH-SNCS-F1H1T

A 12 V PWM turbine blower with hydraulic bearing runs at 2500-2999 RPM and 25-30 dBA for CPU cooler airflow

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeHydraulic
  • RPM2500-2999 RPM
  • Noise Level25 - 30 dBA
  • Power Connector4 Pin
  • PWM control adjusts speed precisely between 2500-2999 RPM
  • Turbine blower design directs focused airflow onto CPU cooler
  • Hydraulic bearing reduces friction for quieter 25-30 dBA operation
  • 12V .3A draw keeps power consumption low
  • 4-pin connector enables automatic motherboard fan management

Zyvpee 12 V .3 A PWM blower fan

The Zyvpee BASC0712R2M is a 12 V turbine-style blower that draws 0.3 A through a 4-pin PWM connector. It targets builders who need focused airflow through a heatsink or tight chassis channel rather than broad case circulation.

Hydraulic bearing eases mounting

The hydraulic bearing reduces friction during spin-up so the fan seats smoothly in standard 4-pin headers. PWM control prevents the motor from hunting at low duty cycles, a common issue with simpler voltage-regulated blowers.

2500–2999 RPM at 25–30 dBA

At full speed the impeller moves enough air for a compact CPU cooler or single-slot GPU heatsink. The acoustic ceiling stays below 30 dBA, so it suits quiet workstations but cannot feed a high-TDP tower cooler or multi-GPU array.

Kohokohdat

  • PWM control adjusts speed precisely between 2500-2999 RPM
  • Turbine blower design directs focused airflow onto CPU cooler
  • Hydraulic bearing reduces friction for quieter 25-30 dBA operation
  • 12V .3A draw keeps power consumption low
  • 4-pin connector enables automatic motherboard fan management

Tekniset tiedot

SeriesBASC0712R2M
ModelBASC0712R2M
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeHydraulic
RPM2500-2999 RPM
Noise Level25 - 30 dBA
Power Connector4 Pin
ColorBlack
LEDNon-LED

Kysymyksiä tästä tuotteesta

How can I verify the fan is running at the correct 2500-2999 RPM range after connecting the 4-pin PWM connector?

Connect the 4-pin PWM header to the motherboard, then monitor the reported speed in BIOS or fan-control software; it should read between 2500 and 2999 RPM under load.

Does the package include mounting screws or a power adapter, or must I supply them myself?

The fan ships with the turbine blower unit only; standard case-fan screws and any required 4-pin extension cables are not included and must be purchased separately.

Should I choose this 12 V 0.3 A hydraulic-bearing model or a different version for a CPU cooler that specifies 25-30 dBA noise?

This BASC0712R2M is rated at 12 V, 0.3 A with a hydraulic bearing and 25-30 dBA output, matching coolers that call for those exact electrical and acoustic specifications.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.