EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
A-Tech
8GB DDR3 1333MHz desktop module runs at 1.5V with 240-pin unbuffered non-ECC design for AMD and Intel systems
This A-Tech module is an 8GB DDR3 DIMM that runs at 1333MHz with a standard 1.50V supply. It uses a 240-pin unbuffered, non-ECC design and is built as a direct replacement for Micron MT16JTF1G64AZ-1G4 and MT16JTF1G64AZ-1G4D1 parts. The single stick adds 8GB of capacity to a compatible desktop system.
This module suits owners of desktops that accept DDR3 1333MHz PC3-10600 unbuffered non-ECC memory in a 240-pin slot. Builders who need ECC error correction, registered buffering, a different DDR generation, or speeds other than 1333MHz should look at something else. Systems limited to lower maximum module densities will not support this 8GB stick.
The deciding specification is the DDR3 1333MHz PC3-10600 240-pin unbuffered non-ECC standard at 1.50V. Your motherboard and CPU memory controller must explicitly support this exact combination of generation, speed, voltage, form factor, and buffering type. Verify the system manual before purchase; an incorrect generation or voltage will prevent the module from functioning.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| Tested Frequency | 1333 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The package contains one 8GB DDR3 1333MHz PC3-10600 240-Pin DIMM module; no tools, cables or additional memory sticks are supplied.
This is a single 8GB module; if your board supports dual-channel you can add a second identical stick later, but a matched 2x4GB kit would enable dual-channel immediately.
The module is tested at 1333MHz with standard 1.50V DDR3 voltage; the final operating speed is set by the memory controller in your CPU and the motherboard BIOS.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?