Micron Technology, Inc.
Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
$28.99
0.00037433BTC
En stock
A-Tech
A-Tech 8GB DDR3 1333MHz PC3-10600 240-Pin Desktop RAM
8GB DDR3 1333MHz desktop module runs at 1.5V with 240-pin unbuffered non-ECC design for AMD and Intel systems
- Capacity8GB
- SpeedDDR3 1333 (PC3 10600)
- Tested Frequency1333
- Voltage1.50V
- ECCNo
- Buffered/RegisteredUnbuffered
- 8GB capacity lets you run more applications simultaneously with a single 8GB DDR3 module
- 1333MHz speed delivers responsive desktop performance at PC3-10600 data rates
- 240-pin DIMM form factor fits standard desktop motherboard slots for straightforward installation
- Non-ECC unbuffered design matches mainstream desktop memory requirements without error-correction overhead
- 50V standard DDR3 voltage ensures compatibility with typical desktop power delivery
8GB DDR3 1333MHz Desktop Memory
This A-Tech module is an 8GB DDR3 DIMM that runs at 1333MHz with a standard 1.50V supply. It uses a 240-pin unbuffered, non-ECC design and is built as a direct replacement for Micron MT16JTF1G64AZ-1G4 and MT16JTF1G64AZ-1G4D1 parts. The single stick adds 8GB of capacity to a compatible desktop system.
Who This Suits And Who It Does Not
This module suits owners of desktops that accept DDR3 1333MHz PC3-10600 unbuffered non-ECC memory in a 240-pin slot. Builders who need ECC error correction, registered buffering, a different DDR generation, or speeds other than 1333MHz should look at something else. Systems limited to lower maximum module densities will not support this 8GB stick.
The Deciding Specification
The deciding specification is the DDR3 1333MHz PC3-10600 240-pin unbuffered non-ECC standard at 1.50V. Your motherboard and CPU memory controller must explicitly support this exact combination of generation, speed, voltage, form factor, and buffering type. Verify the system manual before purchase; an incorrect generation or voltage will prevent the module from functioning.
Points forts
- 8GB capacity lets you run more applications simultaneously with a single 8GB DDR3 module
- 1333MHz speed delivers responsive desktop performance at PC3-10600 data rates
- 240-pin DIMM form factor fits standard desktop motherboard slots for straightforward installation
- Non-ECC unbuffered design matches mainstream desktop memory requirements without error-correction overhead
- 50V standard DDR3 voltage ensures compatibility with typical desktop power delivery
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| Tested Frequency | 1333 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
Does the package contain only the single 8GB DDR3 1333MHz 240-Pin DIMM, or are any installation tools or extra modules included?
The package contains one 8GB DDR3 1333MHz PC3-10600 240-Pin DIMM module; no tools, cables or additional memory sticks are supplied.
My motherboard has two DDR3 slots — should I buy this single 8GB stick or look for a 2x4GB kit instead?
This is a single 8GB module; if your board supports dual-channel you can add a second identical stick later, but a matched 2x4GB kit would enable dual-channel immediately.
Will the rated PC3-10600 1333MHz speed actually run at that frequency in my desktop, or does it depend on the CPU and motherboard?
The module is tested at 1333MHz with standard 1.50V DDR3 voltage; the final operating speed is set by the memory controller in your CPU and the motherboard BIOS.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Kingston Technology Corp.
Kingston Technology Corp. KTD-DM8400A/512 512MB DDR2 desktop RAM
- 512MB
- CL4
$12.99
0.00016773BTC
En stock
