Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Chrome 45-degree revolvable compression fitting G1/4 10/16mm ID/OD

Alphacool

Alphacool G1/4 3/8"ID 5/8"OD 45° Revolvable Compression Fitting Chrome 17083

SKU CH-2HXC-JPHZC

A 45-degree revolvable compression fitting with G1/4 thread for 10 mm inner diameter tubing

  • TypeFittings

Color Chrome

  • High flow with true 10 mm inner diameter
  • 45° revolvable design simplifies tight tubing routes
  • Chrome finish bonded to brass resists peeling
  • G1/4 thread fits standard water-cooling components
  • Compression style seals 16 mm OD tubing securely

Precision 45° Revolvable Fitting

This Alphacool compression fitting joins 3/8" inner diameter tubing to a G1/4 thread at a fixed 45-degree angle. The revolvable body lets you orient the bend after tightening so tube routing stays clean. It suits custom-loop builders who need a compact directional change without adding extra fittings. The chrome finish resists peeling through a bonded chromatising process.

10 mm Inner Diameter for High Flow

The 10 mm bore (16/10 sizing) is the single spec that decides fit: it only accepts tubing with a 3/8" ID and 5/8" OD. Builders using 1/2" ID or 7/16" ID hose cannot use this fitting. No adapter is included, so verify your tubing dimensions before ordering.

Single Fitting Ships Ready to Install

The box contains one chrome fitting with its compression rings and G1/4 o-ring pre-seated. No tools, lubricant or extra seals are bundled. You simply push the tubing home and tighten the collar. Multi-pack buyers must order the quantity they need separately.

Privalumai

  • High flow with true 10 mm inner diameter
  • 45° revolvable design simplifies tight tubing routes
  • Chrome finish bonded to brass resists peeling
  • G1/4 thread fits standard water-cooling components
  • Compression style seals 16 mm OD tubing securely

Specifikacijos

TypeFittings

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What does the 45° angle do for the tubing run inside the case?

The fixed 45° bend lets the tube leave the port at an angle, helping it clear nearby components without a sharp kink.

How does the G1/4 thread connect to the rest of the loop?

The G1/4 male thread screws into any standard G1/4 port on radiators, blocks, reservoirs or pumps.

What tubing sizes fit this compression fitting?

It accepts tubing with a 10 mm inner diameter and 16 mm outer diameter, matching 3/8" ID × 5/8" OD hose.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.