Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Chrome 45-degree revolvable compression fitting G1/4 10/16mm ID/OD

Alphacool

Alphacool G1/4 3/8"ID 5/8"OD 45° Revolvable Compression Fitting Chrome 17083

SKU CH-2HXC-JPHZC

A 45-degree revolvable compression fitting with G1/4 thread for 10 mm inner diameter tubing

  • TypeFittings

Color Chrome

  • High flow with true 10 mm inner diameter
  • 45° revolvable design simplifies tight tubing routes
  • Chrome finish bonded to brass resists peeling
  • G1/4 thread fits standard water-cooling components
  • Compression style seals 16 mm OD tubing securely

Precision 45° Revolvable Fitting

This Alphacool compression fitting joins 3/8" inner diameter tubing to a G1/4 thread at a fixed 45-degree angle. The revolvable body lets you orient the bend after tightening so tube routing stays clean. It suits custom-loop builders who need a compact directional change without adding extra fittings. The chrome finish resists peeling through a bonded chromatising process.

10 mm Inner Diameter for High Flow

The 10 mm bore (16/10 sizing) is the single spec that decides fit: it only accepts tubing with a 3/8" ID and 5/8" OD. Builders using 1/2" ID or 7/16" ID hose cannot use this fitting. No adapter is included, so verify your tubing dimensions before ordering.

Single Fitting Ships Ready to Install

The box contains one chrome fitting with its compression rings and G1/4 o-ring pre-seated. No tools, lubricant or extra seals are bundled. You simply push the tubing home and tighten the collar. Multi-pack buyers must order the quantity they need separately.

Priekšrocības

  • High flow with true 10 mm inner diameter
  • 45° revolvable design simplifies tight tubing routes
  • Chrome finish bonded to brass resists peeling
  • G1/4 thread fits standard water-cooling components
  • Compression style seals 16 mm OD tubing securely

Specifikācijas

TypeFittings

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What does the 45° angle do for the tubing run inside the case?

The fixed 45° bend lets the tube leave the port at an angle, helping it clear nearby components without a sharp kink.

How does the G1/4 thread connect to the rest of the loop?

The G1/4 male thread screws into any standard G1/4 port on radiators, blocks, reservoirs or pumps.

What tubing sizes fit this compression fitting?

It accepts tubing with a 10 mm inner diameter and 16 mm outer diameter, matching 3/8" ID × 5/8" OD hose.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.