Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Chrome 45-degree revolvable compression fitting G1/4 10/16mm ID/OD

Alphacool

Alphacool G1/4 3/8"ID 5/8"OD 45° Revolvable Compression Fitting Chrome 17083

SKU CH-2HXC-JPHZC

A 45-degree revolvable compression fitting with G1/4 thread for 10 mm inner diameter tubing

  • TypeFittings

Color Chrome

  • High flow with true 10 mm inner diameter
  • 45° revolvable design simplifies tight tubing routes
  • Chrome finish bonded to brass resists peeling
  • G1/4 thread fits standard water-cooling components
  • Compression style seals 16 mm OD tubing securely

Precision 45° Revolvable Fitting

This Alphacool compression fitting joins 3/8" inner diameter tubing to a G1/4 thread at a fixed 45-degree angle. The revolvable body lets you orient the bend after tightening so tube routing stays clean. It suits custom-loop builders who need a compact directional change without adding extra fittings. The chrome finish resists peeling through a bonded chromatising process.

10 mm Inner Diameter for High Flow

The 10 mm bore (16/10 sizing) is the single spec that decides fit: it only accepts tubing with a 3/8" ID and 5/8" OD. Builders using 1/2" ID or 7/16" ID hose cannot use this fitting. No adapter is included, so verify your tubing dimensions before ordering.

Single Fitting Ships Ready to Install

The box contains one chrome fitting with its compression rings and G1/4 o-ring pre-seated. No tools, lubricant or extra seals are bundled. You simply push the tubing home and tighten the collar. Multi-pack buyers must order the quantity they need separately.

Puncte forte

  • High flow with true 10 mm inner diameter
  • 45° revolvable design simplifies tight tubing routes
  • Chrome finish bonded to brass resists peeling
  • G1/4 thread fits standard water-cooling components
  • Compression style seals 16 mm OD tubing securely

Specificații

TypeFittings

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What does the 45° angle do for the tubing run inside the case?

The fixed 45° bend lets the tube leave the port at an angle, helping it clear nearby components without a sharp kink.

How does the G1/4 thread connect to the rest of the loop?

The G1/4 male thread screws into any standard G1/4 port on radiators, blocks, reservoirs or pumps.

What tubing sizes fit this compression fitting?

It accepts tubing with a 10 mm inner diameter and 16 mm outer diameter, matching 3/8" ID × 5/8" OD hose.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.