Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Four soft grey thermal pads 120 by 20 mm 1.0 mm thick

ARCTIC

ARCTIC TP-4 Thermal Pad 120x20mm 1.0mm 4 pcs

SKU CH-0N4R-FZNE9

Soft 1.0 mm thermal pad set of four 120×20 mm pieces for RAM, chipsets, GPUs and consoles

  • Extremely soft pad conforms to uneven surfaces
  • Minimises thermal resistance for efficient heat transfer
  • Safe, non-conductive material simplifies installation
  • Flexible 1.0mm thickness dampens vibration on components
  • Four pre-cut 120x20mm pieces cover multiple applications

1.0 mm Thermal Pad for Components

The ARCTIC TP-4 is a 1.0 mm thick thermal pad sized 120 by 20 mm and supplied as a pack of four pieces. It is designed to transfer heat from memory modules, chipsets, graphics cards, consoles and laptops. The material is extremely soft, flexible and vibration-dampening, allowing it to bridge uneven surfaces with minimal thermal resistance.

Suitable for DIY Upgrades and Thin Gaps

This pad suits hobbyists and technicians who need a thin, easy-to-cut interface for small components or tight clearances. It can be stacked without performance loss to achieve a thicker layer when required. Builders looking for a paste-like compound, a thicker single pad or a pre-cut shape for a specific GPU model should consider a different product.

Verify Thickness and Area Before Buying

Measure the gap between the component and the heatsink to confirm that 1.0 mm is the correct thickness for your assembly. Check that the 120 by 20 mm dimensions cover the target surface or can be trimmed to fit. Ensure the mounting pressure will compress the pad evenly across the contact area.

Privalumai

  • Extremely soft pad conforms to uneven surfaces
  • Minimises thermal resistance for efficient heat transfer
  • Safe, non-conductive material simplifies installation
  • Flexible 1.0mm thickness dampens vibration on components
  • Four pre-cut 120x20mm pieces cover multiple applications

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

Do I need to supply my own thermal paste when using the ARCTIC TP-4 pads?

No, the TP-4 pads replace thermal paste entirely; they are pre-cut to 120x20mm at 1.0mm thickness and ready to apply.

Can I stack multiple TP-4 pads to reach a taller gap on an older GPU or console?

Yes, the manufacturer states the pads are stackable without performance loss, so you can combine the 1.0mm sheets to match thicker interfaces.

How can I confirm the pads are making proper contact after installation?

Check that the component temperatures drop under load and that the soft pads have visibly compressed to fill the 1.0mm gap across the 120x20mm surface.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.