ARCTIC
ARCTIC TP-4 Thermal Pad 120x20mm 1.0mm 4 pcs
Soft 1.0 mm thermal pad set of four 120×20 mm pieces for RAM, chipsets, GPUs and consoles
- Extremely soft pad conforms to uneven surfaces
- Minimises thermal resistance for efficient heat transfer
- Safe, non-conductive material simplifies installation
- Flexible 1.0mm thickness dampens vibration on components
- Four pre-cut 120x20mm pieces cover multiple applications
1.0 mm Thermal Pad for Components
The ARCTIC TP-4 is a 1.0 mm thick thermal pad sized 120 by 20 mm and supplied as a pack of four pieces. It is designed to transfer heat from memory modules, chipsets, graphics cards, consoles and laptops. The material is extremely soft, flexible and vibration-dampening, allowing it to bridge uneven surfaces with minimal thermal resistance.
Suitable for DIY Upgrades and Thin Gaps
This pad suits hobbyists and technicians who need a thin, easy-to-cut interface for small components or tight clearances. It can be stacked without performance loss to achieve a thicker layer when required. Builders looking for a paste-like compound, a thicker single pad or a pre-cut shape for a specific GPU model should consider a different product.
Verify Thickness and Area Before Buying
Measure the gap between the component and the heatsink to confirm that 1.0 mm is the correct thickness for your assembly. Check that the 120 by 20 mm dimensions cover the target surface or can be trimmed to fit. Ensure the mounting pressure will compress the pad evenly across the contact area.
주요 특징
- Extremely soft pad conforms to uneven surfaces
- Minimises thermal resistance for efficient heat transfer
- Safe, non-conductive material simplifies installation
- Flexible 1.0mm thickness dampens vibration on components
- Four pre-cut 120x20mm pieces cover multiple applications
사양
이 상품에 대해 아직 공개된 사양이 없습니다.
이 상품에 대한 질문
Do I need to supply my own thermal paste when using the ARCTIC TP-4 pads?
No, the TP-4 pads replace thermal paste entirely; they are pre-cut to 120x20mm at 1.0mm thickness and ready to apply.
Can I stack multiple TP-4 pads to reach a taller gap on an older GPU or console?
Yes, the manufacturer states the pads are stackable without performance loss, so you can combine the 1.0mm sheets to match thicker interfaces.
How can I confirm the pads are making proper contact after installation?
Check that the component temperatures drop under load and that the soft pads have visibly compressed to fill the 1.0mm gap across the 120x20mm surface.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



