暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four soft grey thermal pads 120 by 20 mm 1.0 mm thick

ARCTIC

ARCTIC TP-4 Thermal Pad 120x20mm 1.0mm 4 pcs

SKU CH-0N4R-FZNE9

Soft 1.0 mm thermal pad set of four 120×20 mm pieces for RAM, chipsets, GPUs and consoles

  • Extremely soft pad conforms to uneven surfaces
  • Minimises thermal resistance for efficient heat transfer
  • Safe, non-conductive material simplifies installation
  • Flexible 1.0mm thickness dampens vibration on components
  • Four pre-cut 120x20mm pieces cover multiple applications

1.0 mm Thermal Pad for Components

The ARCTIC TP-4 is a 1.0 mm thick thermal pad sized 120 by 20 mm and supplied as a pack of four pieces. It is designed to transfer heat from memory modules, chipsets, graphics cards, consoles and laptops. The material is extremely soft, flexible and vibration-dampening, allowing it to bridge uneven surfaces with minimal thermal resistance.

Suitable for DIY Upgrades and Thin Gaps

This pad suits hobbyists and technicians who need a thin, easy-to-cut interface for small components or tight clearances. It can be stacked without performance loss to achieve a thicker layer when required. Builders looking for a paste-like compound, a thicker single pad or a pre-cut shape for a specific GPU model should consider a different product.

Verify Thickness and Area Before Buying

Measure the gap between the component and the heatsink to confirm that 1.0 mm is the correct thickness for your assembly. Check that the 120 by 20 mm dimensions cover the target surface or can be trimmed to fit. Ensure the mounting pressure will compress the pad evenly across the contact area.

特長

  • Extremely soft pad conforms to uneven surfaces
  • Minimises thermal resistance for efficient heat transfer
  • Safe, non-conductive material simplifies installation
  • Flexible 1.0mm thickness dampens vibration on components
  • Four pre-cut 120x20mm pieces cover multiple applications

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Do I need to supply my own thermal paste when using the ARCTIC TP-4 pads?

No, the TP-4 pads replace thermal paste entirely; they are pre-cut to 120x20mm at 1.0mm thickness and ready to apply.

Can I stack multiple TP-4 pads to reach a taller gap on an older GPU or console?

Yes, the manufacturer states the pads are stackable without performance loss, so you can combine the 1.0mm sheets to match thicker interfaces.

How can I confirm the pads are making proper contact after installation?

Check that the component temperatures drop under load and that the soft pads have visibly compressed to fill the 1.0mm gap across the 120x20mm surface.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。