Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green 288-pin DDR4 server memory module with black chips and silver heat spreader

Brute Networks

Brute Networks P19040?K21 HPE Compatible 8GB DDR4-2933 1Rx8 Registered ECC server RAM

SKU CH-V8XR-WEWEG

8GB DDR4-2933 registered ECC module built with major-brand chips for HPE server compatibility

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB DDR4-2933 registered ECC memory for stable server workloads
  • 20 V operation lowers power draw per module
  • 1Rx8 single-rank design keeps signal timing tight
  • 288-pin DDR4 form factor fits compatible HPE server slots
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability

HPE-compatible 8 GB DDR4-2933 registered ECC

This module is an 8 GB DDR4-2933 registered ECC DIMM built to match HPE part number P19040?K21. It runs at 1.2 V on a 288-pin interface with a 1Rx8 organisation. System administrators maintaining HPE ProLiant servers use it to add capacity without changing the existing memory configuration.

Replaces OEM DIMMs at lower cost

The stick is validated as a direct drop-in equivalent to the HPE original, so it fits the same slots and keeps the factory warranty intact. Buyers who need to expand memory on supported platforms can install it alongside existing modules without qualification testing. It is not suited for systems that require unbuffered or non-ECC memory, nor for platforms limited to lower DDR4 speeds.

DDR4-2933 registered ECC constraints

Registered ECC modules add a clock cycle of buffering, so they only work in chipsets and CPUs that explicitly support registered DIMMs. The 1.2 V operation is standard for DDR4, but the motherboard must accept PC4-23400 timing. Mixing ranks or speeds can force the channel to the slowest common denominator, and consumer desktop boards will not post with this module.

Privalumai

  • 8GB DDR4-2933 registered ECC memory for stable server workloads
  • 20 V operation lowers power draw per module
  • 1Rx8 single-rank design keeps signal timing tight
  • 288-pin DDR4 form factor fits compatible HPE server slots
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability

Specifikacijos

BrandHPE
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

Klausimai apie šią prekę

Does the 288-pin DDR4 module fit standard server DIMM slots?

Yes, the 288-pin DDR4 form factor matches the standard registered DIMM slots used in compatible HPE servers.

What is the correct seating procedure for the registered ECC module?

Align the notch with the slot key, press firmly until both retention clips click, then verify the 1Rx8 rank is recognised in BIOS.

Will the major-brand chips (Samsung, SK Hynix, or Micron) require any firmware updates over time?

No firmware updates are needed for the DRAM itself; the module is validated at 2933 MHz and 1.20 V for the server's lifetime.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.