我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Brute Networks

Brute Networks P19040?K21 HPE Compatible 8GB DDR4-2933 1Rx8 Registered ECC server RAM

SKU CH-V8XR-WEWEG

8GB DDR4-2933 registered ECC module built with major-brand chips for HPE server compatibility

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB DDR4-2933 registered ECC memory for stable server workloads
  • 20 V operation lowers power draw per module
  • 1Rx8 single-rank design keeps signal timing tight
  • 288-pin DDR4 form factor fits compatible HPE server slots
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability

HPE-compatible 8 GB DDR4-2933 registered ECC

This module is an 8 GB DDR4-2933 registered ECC DIMM built to match HPE part number P19040?K21. It runs at 1.2 V on a 288-pin interface with a 1Rx8 organisation. System administrators maintaining HPE ProLiant servers use it to add capacity without changing the existing memory configuration.

Replaces OEM DIMMs at lower cost

The stick is validated as a direct drop-in equivalent to the HPE original, so it fits the same slots and keeps the factory warranty intact. Buyers who need to expand memory on supported platforms can install it alongside existing modules without qualification testing. It is not suited for systems that require unbuffered or non-ECC memory, nor for platforms limited to lower DDR4 speeds.

DDR4-2933 registered ECC constraints

Registered ECC modules add a clock cycle of buffering, so they only work in chipsets and CPUs that explicitly support registered DIMMs. The 1.2 V operation is standard for DDR4, but the motherboard must accept PC4-23400 timing. Mixing ranks or speeds can force the channel to the slowest common denominator, and consumer desktop boards will not post with this module.

商品特色

  • 8GB DDR4-2933 registered ECC memory for stable server workloads
  • 20 V operation lowers power draw per module
  • 1Rx8 single-rank design keeps signal timing tight
  • 288-pin DDR4 form factor fits compatible HPE server slots
  • Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability

商品規格

BrandHPE
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

商品問答

Does the 288-pin DDR4 module fit standard server DIMM slots?

Yes, the 288-pin DDR4 form factor matches the standard registered DIMM slots used in compatible HPE servers.

What is the correct seating procedure for the registered ECC module?

Align the notch with the slot key, press firmly until both retention clips click, then verify the 1Rx8 rank is recognised in BIOS.

Will the major-brand chips (Samsung, SK Hynix, or Micron) require any firmware updates over time?

No firmware updates are needed for the DRAM itself; the module is validated at 2933 MHz and 1.20 V for the server's lifetime.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。