BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Chenbro
Tower server chassis with three 5.25" external bays, four hot-swap drive bays, seven full-height expansion slots and 80 mm plus 120 mm fans
The Chenbro SR105 Plus is a tower server chassis designed for small-business or departmental deployments. It supports SSI EEB motherboards and provides a compact footprint for office or rack-adjacent placement. The unit ships new and includes basic cooling infrastructure.
This model adds four hot-swap bays and three external 5.25-inch bays over entry-level tower cases that only offer fixed internal mounts. The jump is worth it when you need tool-less drive replacement and optical or backup media access without opening the chassis. Seven full-height expansion slots also allow more add-in cards than typical micro-tower frames.
The chassis suits builders who want hot-swap storage and multiple full-length cards in a tower form factor. It is less suited for buyers who need more than four hot-swap bays, redundant power supply support, or rackmount rails. The single 80mm and single 120mm fan configuration may also limit thermal headroom for high-density configurations.
| Brand | CHENBRO |
|---|---|
| Series | SR105 Plus |
| Model | SR10569-C4+ |
| Chassis Type | Tower |
| External 5.25" Drive Bays | 3 |
| Hot-Swap Drive Bays | 4 |
| Expansion Slots | 7 x Full Height (5 x Full Length + 2 x Half Length) |
| 80mm Fans | 1 |
| 120mm Fans | 1 |
| Dimensions | 16.73" x 7.80" x 20.98" (w/o bezel) |
| Weight | 19.84 lbs. |
| Siuntos svoris | 12.45 kg |
| Pakuotės dydis | 692 × 508 × 279 mm |
The chassis measures 16.73 inches wide and 20.98 inches deep without the bezel, so allow at least that footprint plus cable clearance behind the rear panel.
The 120mm fan mounts at the front pulling air over the four hot-swap bays, while the 80mm fan mounts at the rear exhausting heat; install both with arrows pointing front-to-back.
Plan to replace the 120mm front intake and 80mm rear exhaust fans every two to three years or when bearing noise appears; order standard 120mm and 80mm replacements with matching connector types.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?