BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Chenbro
Tower server chassis with three 5.25" external bays, four hot-swap drive bays, seven full-height expansion slots and 80 mm plus 120 mm fans
The Chenbro SR105 Plus is a tower server chassis designed for small-business or departmental deployments. It supports SSI EEB motherboards and provides a compact footprint for office or rack-adjacent placement. The unit ships new and includes basic cooling infrastructure.
This model adds four hot-swap bays and three external 5.25-inch bays over entry-level tower cases that only offer fixed internal mounts. The jump is worth it when you need tool-less drive replacement and optical or backup media access without opening the chassis. Seven full-height expansion slots also allow more add-in cards than typical micro-tower frames.
The chassis suits builders who want hot-swap storage and multiple full-length cards in a tower form factor. It is less suited for buyers who need more than four hot-swap bays, redundant power supply support, or rackmount rails. The single 80mm and single 120mm fan configuration may also limit thermal headroom for high-density configurations.
| Brand | CHENBRO |
|---|---|
| Series | SR105 Plus |
| Model | SR10569-C4+ |
| Chassis Type | Tower |
| External 5.25" Drive Bays | 3 |
| Hot-Swap Drive Bays | 4 |
| Expansion Slots | 7 x Full Height (5 x Full Length + 2 x Half Length) |
| 80mm Fans | 1 |
| 120mm Fans | 1 |
| Dimensions | 16.73" x 7.80" x 20.98" (w/o bezel) |
| Weight | 19.84 lbs. |
| وزن الشحنة | 12.45 kg |
| أبعاد الطرد | 692 × 508 × 279 mm |
The chassis measures 16.73 inches wide and 20.98 inches deep without the bezel, so allow at least that footprint plus cable clearance behind the rear panel.
The 120mm fan mounts at the front pulling air over the four hot-swap bays, while the 80mm fan mounts at the rear exhausting heat; install both with arrows pointing front-to-back.
Plan to replace the 120mm front intake and 80mm rear exhaust fans every two to three years or when bearing noise appears; order standard 120mm and 80mm replacements with matching connector types.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟