BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Chenbro
Tower server chassis with three 5.25" external bays, four hot-swap drive bays, seven full-height expansion slots and 80 mm plus 120 mm fans
The Chenbro SR105 Plus is a tower server chassis designed for small-business or departmental deployments. It supports SSI EEB motherboards and provides a compact footprint for office or rack-adjacent placement. The unit ships new and includes basic cooling infrastructure.
This model adds four hot-swap bays and three external 5.25-inch bays over entry-level tower cases that only offer fixed internal mounts. The jump is worth it when you need tool-less drive replacement and optical or backup media access without opening the chassis. Seven full-height expansion slots also allow more add-in cards than typical micro-tower frames.
The chassis suits builders who want hot-swap storage and multiple full-length cards in a tower form factor. It is less suited for buyers who need more than four hot-swap bays, redundant power supply support, or rackmount rails. The single 80mm and single 120mm fan configuration may also limit thermal headroom for high-density configurations.
| Brand | CHENBRO |
|---|---|
| Series | SR105 Plus |
| Model | SR10569-C4+ |
| Chassis Type | Tower |
| External 5.25" Drive Bays | 3 |
| Hot-Swap Drive Bays | 4 |
| Expansion Slots | 7 x Full Height (5 x Full Length + 2 x Half Length) |
| 80mm Fans | 1 |
| 120mm Fans | 1 |
| Dimensions | 16.73" x 7.80" x 20.98" (w/o bezel) |
| Weight | 19.84 lbs. |
| Тегло на пратката | 12.45 kg |
| Размери на опаковката | 692 × 508 × 279 mm |
The chassis measures 16.73 inches wide and 20.98 inches deep without the bezel, so allow at least that footprint plus cable clearance behind the rear panel.
The 120mm fan mounts at the front pulling air over the four hot-swap bays, while the 80mm fan mounts at the rear exhausting heat; install both with arrows pointing front-to-back.
Plan to replace the 120mm front intake and 80mm rear exhaust fans every two to three years or when bearing noise appears; order standard 120mm and 80mm replacements with matching connector types.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?