NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Corn Electronics
Full tower case holds 13 HDD bays and 2 SSD slots with magnetic front panel and 360 mm liquid-cooling support
The Corn Electronics KM7B is a full-tower case built for storage-heavy builds such as NAS servers or local media libraries. It accepts Micro-ATX, ATX and E-ATX motherboards and provides thirteen hard-drive bays plus two SSD positions. A magnetic front panel simplifies access to the drive cages. No power supply is included.
Front mounts accept three 120 mm or 140 mm fans, the top takes three 120 mm or two 140 mm fans and the rear fits one 120 mm or 140 mm fan. Liquid-cooling support covers 360 mm and 280 mm radiators. The steel, aluminium and ABS construction helps dissipate heat during long file-transfer or parity-check sessions.
Thirteen 3.5-inch bays are the specification that determines suitability; systems needing fewer drives will leave capacity unused while larger arrays require external enclosures. GPU length is limited to 417 mm without the cages or 280 mm with them installed. CPU cooler height maxes out at 180 mm.
| Type | ATX Full Tower |
|---|---|
| Color | Black |
| Case Material | ABS / Aluminum / Steel |
| With Power Supply | No |
| Motherboard Compatibility | ATX |
| Side Panel | without Side Window |
The case supports up to seven fans — three 120 or 140 mm at the front, one at the rear and two or three on top — so sustained airflow depends on the fans you install rather than a fixed noise or heat figure.
You need an ATX-format power supply, a Micro-ATX, ATX or E-ATX motherboard, a CPU cooler no taller than 180 mm, and any graphics card up to 417 mm long if the drive bays are removed or 280 mm with them fitted.
A 360 mm radiator can be mounted in the front or top, but with the drive bays installed the maximum graphics-card length drops to 280 mm, so a longer legacy card would require removing the bays to keep the 417 mm clearance.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?